1208500

ASD 21 CLIPLINE Data Sheet s. © PHOENIX CONTACT - 08/2005 co m Cordless Drill & Driver nt Description ne The ASD 21 cordless drill and driver can be used to drive screws and drill holes. Features po om in ec – – – – – – – – – – Automatic shutdown clutch (extends the service life of the battery and the clutch by immediately stopping rotation once the specified torque has been reached) 21-stage clutch with additional drilling stage High-precision torque adjustment Forward/reverse running Two-speed gear Clutch torque accuracy of ±5% Maximum of 600 rpm for driving screws quickly Maximum of 4.4 Nm (at low speed) 6.5 mm hexagonal quick connection drill chuck 15 minute charging time Easy to switch from straight to pistol grip on l – Observe the safety instructions in the user manual and the package slip! This data sheet is only valid in association with the UM IA ASD 21 user manual (Order No. 1208539). Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: 102772_00_en PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany Phone: +49-(0) 5235-3-00 • Fax: +49-(0) 5235-3-4 12 00 • www.phoenixcontact.com www.phoenixcontact.com/salesnetwork 1 ASD 21 Ordering Data Products Description Type Order No. Cordless drill & driver, without accessories ASD 21 1208526 1 Cordless drill & driver, incl. battery pack, battery charger, user manual, case, 2 Phillips bits and 1 ASD Bit 0.6 x 3.5 x 50, for 230 V AC ASD 21 SET 230V 1208490 1 Cordless drill & driver, incl. battery pack, battery charger, user manual, case, 2 Phillips bits and 1 ASD Bit 0.6 x 3.5 x 50, for 120 V AC ASD 21 SET 120V 1208542 1 Pcs./Pck. Type Order No. Pcs./Pck. Battery pack, 1.2 Ah ASD 21 ACCU 1,2AH 1208500 1 ASD 21 CHARGER 230V ASD 21 CHARGER 120V Documentation Description Type User manual for cordless drill & driver UM IA ASD 21 s. Capacity Machine screw driving Wood screw driving Drilling in metal Pcs./Pck. 1 po M 2.5 – M5 ø 3.8 × 38 mm ø 2 mm 600 screws with ø 4 × 10 mm om Operational capacity Motor in ec No load speed Automatic shutdown clutch Order No. 1208539 nt Main Unit Max. clutch torque 1 1 ne Technical Data Max. torque 1208513 1208555 co Battery charger, for 230 V Battery charger, for 120 V m Accessories Description on l Dimensions in angled position Weight (with battery pack) Continuous sound pressure level according to EN 50260 under normal operation Vibration according to EN 50260 DC motor 3.6 V LOW: 200/min (RPM) HIGH: 600/min (RPM) LOW: 4.4 Nm HIGH: 1.5 Nm 3.0 Nm 21 settings (0.3 Nm to 3.0 Nm) 296 mm x 39 mm 0.5 kg ≤ 70 dB(A) ≤ 2.5 m/s2 Battery Pack Storage battery Ni-Cd battery Battery voltage 3.6 V DC (3x 1.2 V cells) Battery Charger Charging time Approx. 15 minutes for 3.6 V Weight 0.6 kg 102772_00_en PHOENIX CONTACT 2 ASD 21 Speed selector switch setting 1 0.29 Nm LOW or HIGH 2 0.42 Nm LOW or HIGH 3 0.56 Nm LOW or HIGH 4 0.69 Nm LOW or HIGH 5 0.82 Nm LOW or HIGH 6 0.95 Nm LOW or HIGH 7 1.09 Nm LOW or HIGH 8 1.22 Nm LOW or HIGH 9 1.35 Nm LOW or HIGH 10 1.48 Nm LOW or HIGH 11 1.62 Nm LOW 12 1.75 Nm LOW 13 1.88 Nm LOW 14 2.01 Nm LOW 15 2.15 Nm LOW 16 2.28 Nm LOW 17 2.41 Nm LOW 18 2.54 Nm LOW 19 2.68 Nm 20 2.81 Nm 21 2.94 Nm nt ne po om LOW LOW in ec LOW LOW on l 4.4 Nm co Torque s. Scale m Clutch Torque Setting © PHOENIX CONTACT 08/2005 102772_00_en PHOENIX CONTACT 3