CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2,
IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), 32 A / 480 V (AC), Single wires, length: 2 m, locking actuator: 24 V, 4-pos., Front and
rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.
Product description
Vehicle charging inlet for charging with alternating current (AC) and direct current (DC), compatible with type 2 AC and CCS vehicle charging
connectors (EVSE), for installation in electric vehicles (EV).
Your advantages
• Complete product range
• Uniform, space-saving dimensions for the installation space and the screw connection points of all Phoenix Contact vehicle charging inlets
• Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
• Integrated interlock during charging
• Manual emergency release of the locking actuator
• Protected and sealed against dirt and water with a high degree of protection
Commercial data
Item number
1211212
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
EM01
Product key
XWCAID
GTIN
4063151284404
Weight per piece (including packing)
6,235 g
Weight per piece (excluding packing)
6,235 g
Customs tariff number
85444290
Country of origin
PL
Jan 8, 2024, 8:54 AM
Page 1 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Technical data
Notes
General
A protective cap is supplied as standard for the DC and AC
contacts.
Product properties
Product type
Vehicle charging inlet
Product family
CHARX connect universal
Application
for charging with alternating current (AC) and with direct current
(DC)
for installation in electric vehicles (EV)
Technology
Combined Charging System
Charging standard
CCS type 2
Charging mode
Mode 2, 3, 4
Electrical properties
Type of signal transmission
Pulse width modulation with modulated Powerline
communication in accordance with ISO/IEC 15118 / DIN SPEC
70121
Note on the connection method
Crimp connection, cannot be disconnected
Insulation resistance
> 200 MΩ
Coding
4.7 kΩ (between PE and PP)
Temperature measurement
DC contacts: 2x PT1000 (DIN EN 60751)
Temperature monitoring
AC contacts: PTC chain (DIN
Type of charging current
AC 3-phase
Charging power
26 kW
Charging current
32 A
Type of charging current
DC
Charging power
200 kW
Charging current
200 A
Type of charging current
DC Boost Mode
Charging power
up to 500 kW (Boost Mode, depending on the ambient
conditions. For detailed information, see the packing slip in the
download area for this item.)
Charging current
up to 500 A (Boost Mode, depending on the ambient conditions.
For detailed information, see the packing slip in the download
area for this item.)
EN 60738-1)
Power contact
Number
7 (L1, L2, L3, N, PE, DC+, DC-)
Rated voltage
480 V AC
1000 V DC
Rated current
32 A AC
200 A DC (DC+, DC-, PE)
Signal contact
Jan 8, 2024, 8:54 AM
Page 2 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Number
2 (CP, PP)
Rated voltage
30 V AC
Rated current
2A
Temperature sensors (PTC chain)
Sensor type
PTC chain
Standards/regulations
DIN
Attachment point
Sensor for the AC contacts
Measuring range_resistance
790 Ω ... 1420 Ω
Resistance
max. 1280 Ω ±5 K
Recommended measured current
≤ 1 mA (Umax= 16 V DC)
Ambient temperature
-40 °C ... 130 °C (Operation)
EN 60738-1
Temperature sensors (Pt 1000)
Sensor type
Pt 1000
Standards/regulations
DIN EN 60751
Attachment point
2 sensors for the DC contacts
Locking actuator
Operating voltage
24 V
Note number of positions
4-pos.
Position of the locking actuator
right-side
Locking actuator
Operating voltage
24 V
Note number of positions
4-pos.
Position of the locking actuator
right-side
Possible power supply range at the motor
22 V ... 26 V
Maximum voltage for locking detection
30 V
Typical motor current for locking
0.05 A
Reverse current of the motor
max. 0.5 A
Max. dwell time with reverse current
1s
Recommended adaptation time
600 ms
Pause time after entry or exit path
3s
Service life insertion cycles
> 10000 load cycles
Lock recognition
available
Mechanical emergency release
available
Ambient temperature (operation)
-30 °C ... 50 °C
Dimensions
Width
117.65 mm
Height
90 mm
Depth
117.65 mm
Material specifications
Color (Housing)
black (9005)
Jan 8, 2024, 8:54 AM
Page 3 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Color (Mating face)
black (9005)
Material (Housing)
Plastic
Material (Contact surface)
Silver
Cable/line
Cable length
2m
Cable type
Single wires
Single wire, cross section
70.00 mm²
Single-core wires for AC
Cable length
2m
Cable structure
4 x 6 mm²
Single wire, material
Silicone
Single wire, color
OG
External cable diameter
14.7 mm ±0.2 mm
Cable resistance
≤ 3.2 Ω/km
Single-core wires for DC
Cable length
2m
Cable structure
2 x 70 mm²
Single wire, material
Silicone
Single wire, color
OG
External cable diameter
17.9 mm ±0.3 mm
Cable resistance
≤ 0.259 Ω/km
Single-core wire for PE
Cable length
2m
Cable structure
1 x 25 mm²
Single wire, material
Silicone
Single wire, color
GN/YE
External cable diameter
8.6 mm ±0.1 mm
Cable resistance
≤ 0.743 Ω/km
Single-core wires for locking actuator
Cable length
0.5 m
Cable structure
4 x 0.5 mm²
Single wire, material
PVC
Single wire, color
BU/RD, BU/GN, BU/YE, BU/BN
External cable diameter
1.6 mm ±0.20 mm
Cable resistance
≤ 37.1 Ω/m
Single-core wires for PTC temperature sensors
Cable length
1m
Cable structure
5 x 0,5 mm²
Single wire, material
PVC
Single wire, color
BN/GY
Jan 8, 2024, 8:54 AM
Page 4 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
BN/YE/GN
External cable diameter
1.6 mm ±0.20 mm
Cable resistance
≤ 37.1 Ω/m
Single-core wires for Pt 1000 temperature sensors
Cable length
1m
Cable structure
3 x 0.5 mm²
Single wire, material
PVC
Single wire, color
BN
GN
YE
External cable diameter
1.6 mm ±0.20 mm
Cable resistance
≤ 37.1 Ω/m
Single-core wires for communication
Cable length
1m
Cable structure
2 x 0.5 mm²
Single wire, material
PVC
Single wire, color
BK
WH
External cable diameter
1.6 mm ±0.20 mm
Cable resistance
≤ 37.1 Ω/m
Mechanical properties
Mechanical data
Insertion/withdrawal cycles
> 10000
Insertion force
< 100 N
Withdrawal force
< 100 N
Environmental and real-life conditions
Ambient conditions
Degree of protection (Vehicle charging inlet)
IP55 (plugged in; when plugged in and ready to operate, the
degree of protection is only ensued if both plug-in components
are original products from Phoenix Contact or suitable standardcompliant products)
IP67 (Inner area of vehicle charging inlet)
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
4000 m (above sea level)
Standards and regulations
Standards
Standards/regulations
IEC 62196-2
IEC 62196-3
Jan 8, 2024, 8:54 AM
Page 5 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Mounting
Mounting type
Front and rear mounting (0 to 90 degree frontal inclination
possible)
Mounting hole diameter
6.70 mm (ø)
Fixing screws
M6
Screws included in the scope of delivery
none
Jan 8, 2024, 8:54 AM
Page 6 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Drawings
Connection diagram
PE
PP
CP
L1
N
L2
L3
DC-
DC+
Pin assignment of vehicle charging inlets
Connection diagram
Installation positions
Jan 8, 2024, 8:54 AM
Page 7 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Schematic diagram
DC
AC
The Combined Charging System (CCS) principle - standard-compliant charging system for electric vehicles, which supports both conventional AC
charging and fast DC charging. Both Vehicle Connectors fit into the CCS Vehicle Inlet.
T [°C]
Schematic diagram
Charging
Shutdown
shutdown threshold
RPTC [Ω]
Temperature sensor technology resistance range at AC contacts
Jan 8, 2024, 8:54 AM
Page 8 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
M
[V]
Diagram
24
12
0
-12
-24
0
200
400
600
t [ms]
RL
RU
800 1000 1200 1400 1600
0
200
400
600
800 1000 1200 1400 1600
t [ms]
Locking states of the locking actuator
Jan 8, 2024, 8:54 AM
Page 9 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Schematic diagram
DC
[I]
DC
[II]
DC
[III]
DC
[IV]
[V]
DC
Operating instructions
Jan 8, 2024, 8:54 AM
Page 10 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Dimensional drawing
6,9
Ø 6,7
14,8
80,8
83
27,4
116,7
117,7
137,4
140,3
103,5
88,3
90
13,9
28,3
108
128,5
101
9,4
Ø 11
Dimensional drawing
Dimensional drawing
Actuator
0,8 m = ±150 mm
Signal
AC
PE
DC (+)
DC (–)
Reference points for measuring the line length
Jan 8, 2024, 8:54 AM
Page 11 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Connection diagram
RL
RU
X₁
X₂
RU = 1 k
X₃
RL = 11 k
X₄
X (mm)
RU = 1 k
Detection for Vehicle Connector
Jan 8, 2024, 8:54 AM
Page 12 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Block diagram
+ BU/RD
BU/GN
M
BU/YE
- BU/BN
0,5 mm2
0,5 mm2
0,5 mm2
0,5 mm2
Block diagram of the locking actuator
[°C]
Diagram
120
100
80
60
40
20
0
-20
-40
-60
800
1
1 = T(RPt 1000) = a * RPt 1000 - b
VAR = +25 °C
900
1000
1100
1200
1300
1400 1500
RPt 1000[Ω]
Pt 1000 characteristic curve at an ambient temperature of 25°C for temperature measurement at the DC contacts
Jan 8, 2024, 8:54 AM
Page 13 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Classifications
ECLASS
ECLASS-11.0
27144706
ECLASS-12.0
27144706
ECLASS-13.0
27144706
ETIM
ETIM 9.0
EC002898
Jan 8, 2024, 8:54 AM
Page 14 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Environmental product compliance
REACh SVHC
Lead 7439-92-1
DOTE 15571-58-1
Dechlorane Plus
China RoHS
Environmentally Friendly Use Period = 10;
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Jan 8, 2024, 8:54 AM
Page 15 (16)
CHARX T2HBI24-3AC32DC200-2,0M2 - Vehicle
charging inlet
1211212
https://www.phoenixcontact.com/us/products/1211212
Accessories
CHARX T2HBI-DUST-COVER-SET - Protective cover
1305486
https://www.phoenixcontact.com/us/products/1305486
CHARX connect universal, Protective
cover, Accessories, for vehicle
charging inlet, CCS type 2, Plug-on
assembly, housing: black
CHARX T2HI-ELOCK24V - Locking
1331524
https://www.phoenixcontact.com/us/products/1331524
CHARX connect universal, Locking,
Accessories, for mounting on vehicle
charging inlets, Type 2, IEC 61851-1,
Single wires, length: 1 m, locking
actuator: 24 V, 4-pos.
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 8:54 AM
Page 16 (16)