1211217

Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. CHARX connect, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), length: 2 m (DC cables), locking actuator: 24 V, 4-pos., Front and rear mounting, M6, X-Line, housing: black, A protective cap is supplied as standard for the DC contacts. Product Description Vehicle charging inlet for charging with direct current (DC), compatible with type 2 CCS vehicle charging connectors (EVSE), for installation in electric vehicles for electromobility (EV). Your advantages • Complete product range • Uniform, space-saving dimensions for the installation space and the screw connection points of all Phoenix Contact vehicle charging inlets • Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001 • Safe against overheating with temperature measurement at every DC power contact • Integrated interlock during charging • Manual emergency release of the locking actuator • Protected and sealed against dirt and water with a high degree of protection Commercial Data Item number 1211217 Packing unit 1 pc Minimum order quantity 1 pc Sales Key A17 Product Key XWCAID GTIN 4063151283933 Weight per Piece (including packing) 5,256 g Weight per Piece (excluding packing) 5.21 g Customs tariff number 85444290 Country of origin PL Nov 1, 2022, 11:34 PM Page 1 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Technical Data Notes General A protective cap is supplied as standard for the DC contacts. Product properties Product type Vehicle charging inlet Application for charging with direct current (DC) for installation in electric vehicles (EV) Combined Charging System Locking type Locking in the inserted state with a locking mechanism Charging standard CCS type 2 Charging mode Mode 4 Electrical properties Type of signal transmission Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 Note on the connection method Crimp connection, cannot be disconnected Insulation resistance > 200 MΩ Coding 4.7 kΩ (between PE and PP) Temperature measurement DC contacts: 2x PT1000 (DIN EN 60751) Type of charging current DC Charging power 200 kW Charging current 200 A Type of charging current DC Boost Mode Charging power up to 500 kW (Boost Mode, depending on the ambient conditions. For detailed information, see the packing slip in the download area for this item.) Charging current up to 500 A (Boost Mode, depending on the ambient conditions. For detailed information, see the packing slip in the download area for this item.) Power contact Number 3 (PE, DC+, DC-) Rated voltage 1000 V DC Rated current 200 A DC Signal contact Number 2 (CP, PP) Rated voltage 30 V AC Rated current 2A (Pt 1000) Sensor type Pt 1000 Standards/regulations DIN EN 60751 Nov 1, 2022, 11:34 PM Page 2 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Locking actuator Operating voltage 24 V Note number of positions 4-pos. Position of the locking actuator right-side Locking actuator Possible power supply range at the motor 22 V ... 26 V Maximum voltage for locking detection 30 V Typical motor current for locking 0.05 A Reverse current of the motor max. 0.5 A Max. dwell time with reverse current 1s Recommended adaptation time 600 ms Pause time after entry or exit path 3s Service life insertion cycles > 10000 load cycles Lock recognition available Mechanical emergency release available Ambient temperature (operation) -30 °C ... 50 °C Cable length 0.5 m Cable structure 4 x 0.5 mm² Bending radius min. 15 mm External cable diameter 1.6 mm ±0.02 mm Cable weight 7 kg/km Cable resistance ≤ 37.1 Ω/m Single wire, color BU/RD, BU/GN, BU/YE, BU/BN Dimensions Dimensional drawing Width 108 mm Height 140.25 mm Depth 133.5 mm Bore dimensions 117.65 mm x 90 mm, 117.65 mm x 83 mm Material specifications Material Plastic Silver Connector Insertion/withdrawal cycles > 10000 Nov 1, 2022, 11:34 PM Page 3 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Cable / line Cable length 2 m (DC cables) 2 m (PE cable) 1 m (Locking actuator cables) 1 m (Temperature sensors cables) 1 m (Communications cables) DC cable Cable weight approx. 889 kg/km Conductor structure 2 x 70 mm² External cable diameter 17.9 mm ±0.3 mm Outer sheath, material Silicone External sheath, color orange Conductor resistance ≤ 0.259 Ω/km Cable weight approx. 251 kg/km Conductor structure 1 x 25 mm² External cable diameter 8.6 mm ±0.1 mm Outer sheath, material Silicone External sheath, color green-yellow Conductor resistance ≤ 0.743 Ω/km Communication cable Cable weight 7 kg/km Conductor structure 0.5 mm² + 0.5 mm² External cable diameter 1.6 mm -0.2 mm Outer sheath, material PVC Conductor resistance ≤ 37.1 Ω/km Single wire, cross section 6 mm² Mechanical properties Mechanical data Insertion force < 100 N Withdrawal force < 100 N Environmental and real-life conditions Ambient conditions Degree of protection IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standardcompliant products) IP67 (Inner area of vehicle charging inlet) Altitude 4000 m (above sea level) Standards and regulations Nov 1, 2022, 11:34 PM Page 4 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Standards Standards/regulations IEC 62196-2 IEC 62196-3 Mounting Mounting type Front and rear mounting (0 to 90 degree frontal inclination possible) Mounting hole diameter 6.70 mm (ø) Fixing screws M6 Screws included in the scope of delivery none Nov 1, 2022, 11:34 PM Page 5 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Drawings T [°C] Schematic diagram Charging Shutdown shutdown threshold RPTC [Ω] Temperature sensor technology resistance range at AC contacts Nov 1, 2022, 11:34 PM Page 6 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Schematic diagram DC [I] DC [II] DC [III] DC [IV] [V] DC Operating instructions Nov 1, 2022, 11:34 PM Page 7 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Connection diagram Installation positions Nov 1, 2022, 11:34 PM Page 8 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Connection diagram RL RU X₁ X₂ RU = 1 k X₃ RL = 11 k X₄ X (mm) RU = 1 k Detection for Vehicle Connector Nov 1, 2022, 11:34 PM Page 9 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217  [°C] Diagram 120 100 80 60 40 20 0 -20 -40 -60 800 1 1 = T(RPt 1000) = a * RPt 1000 - b  VAR = +25 °C 900 1000 1100 1200 1300 1400 1500 RPt 1000[Ω] Pt 1000 characteristic curve at an ambient temperature of 25°C for temperature measurement at the DC contacts Dimensional drawing 6,9 83 101 14,8 Ø 6,7 80,8 27,4 116,7 117,7 137,4 140,3 103,5 88,3 90 13,9 28,3 108 128,5 9,4 Ø 11 Dimensional drawing Nov 1, 2022, 11:34 PM Page 10 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Block diagram + BU/RD BU/GN M BU/YE - BU/BN 0,5 mm2 0,5 mm2 0,5 mm2 0,5 mm2 Block diagram of the locking actuator Schematic diagram DC AC The Combined Charging System (CCS) principle - standard-compliant charging system for electric vehicles, which supports both conventional AC charging and fast DC charging. Both Vehicle Connectors fit into the CCS Vehicle Inlet. Nov 1, 2022, 11:34 PM Page 11 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 M [V] Diagram 24 12 0 -12 -24 0 200 400 600 t [ms] RL RU 800 1000 1200 1400 1600 0 200 400 600 800 1000 1200 1400 1600 t [ms] Locking states of the locking actuator Nov 1, 2022, 11:34 PM Page 12 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Connection diagram PE PP CP L1 N L2 L3 DC- DC+ Pin assignment of vehicle charging inlets Nov 1, 2022, 11:34 PM Page 13 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Classifications ECLASS ECLASS-9.0 27144706 ECLASS-10.0.1 27144706 ECLASS-11.0 27144706 ETIM ETIM 8.0 EC002898 UNSPSC UNSPSC 21.0 39121800 Nov 1, 2022, 11:34 PM Page 14 (15) Vehicle charging inlet - CHARX T2HBI24-DC2002,0M2 1211217 https://www.phoenixcontact.com/us/products/1211217 Environmental Product Compliance REACh SVHC Lead 7439-92-1 DOTE 15571-58-1 Dechlorane Plus China RoHS Environmentally Friendly Use Period = 10; For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Nov 1, 2022, 11:34 PM Page 15 (15)