1211606

CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 1, IEC 62196-2, IEC 62196-3, 250 A / 1000 V (DC), Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts. Product description Vehicle charging inlet for charging with direct current (DC), compatible with type 1 CCS vehicle charging connectors (SE), for installation in electric vehicles (EV). Your advantages • Complete product range • Uniform, space-saving dimensions for the installation space and the screw connection points of all Phoenix Contact vehicle charging inlets • Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001 • Integrated interlock during charging • Manual emergency release of the locking actuator • Protected and sealed against dirt and water with a high degree of protection Commercial data Item number 1211606 Packing unit 1 pc Minimum order quantity 1 pc Sales key EM01 Product key XWCAIB GTIN 4063151285043 Weight per piece (including packing) 6,579 g Weight per piece (excluding packing) 6.26 g Customs tariff number 85444290 Country of origin PL Jan 8, 2024, 9:55 AM Page 1 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Technical data Notes General A protective cap is supplied as standard for the DC contacts. Product properties Product type Vehicle charging inlet Product family CHARX connect universal Application for charging with direct current (DC) for installation in electric vehicles (EV) Technology Combined Charging System Charging standard CCS type 1 Charging mode Mode 4 Electrical properties Type of signal transmission Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 Note on the connection method Crimp connection, cannot be disconnected Insulation resistance > 200 MΩ Coding 2.7 kΩ (between PE and CS) Temperature measurement DC contacts: 2x PT1000 (DIN EN 60751) Type of charging current DC Charging power 250 kW Charging current 250 A Power contact Number 5 (L1, N, PE, DC+, DC-) Rated voltage 1000 V DC Rated current 250 A DC Signal contact Number 2 (CP, CS) Rated voltage 30 V AC Rated current 2A Temperature sensors (Pt 1000) Sensor type Pt 1000 Standards/regulations DIN EN 60751 Attachment point 2 sensors for the DC contacts Locking actuator Operating voltage 12 V Note number of positions 4-pos. Position of the locking actuator top center Jan 8, 2024, 9:55 AM Page 2 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Locking actuator Operating voltage 12 V Note number of positions 4-pos. Position of the locking actuator top center Possible power supply range at the motor 9 V ... 16 V Maximum voltage for locking detection 12 V Typical motor current for locking 0.25 A Reverse current of the motor max. 1.5 A Max. dwell time with reverse current 1s Recommended adaptation time 600 ms Pause time after entry or exit path 3s Service life insertion cycles > 10000 load cycles Lock recognition available Mechanical emergency release available Ambient temperature (operation) -40 °C ... 80 °C Dimensions Width 117.6 mm Height 90 mm Depth 117.6 mm Material specifications Color (Housing) black (9005) Color (Mating face) black (9005) Material (Housing) Plastic Material (Contact surface) Silver Cable/line Cable length 2m Cable type Single wires Single-core wires for DC Cable length 2m Cable structure 2 x 95 mm² Single wire, material Silicone Single wire, color OG External cable diameter 20.6 mm ±0.3 mm Cable resistance ≤ 0.196 Ω/km Single-core wire for PE Cable length 2m Cable structure 1 x 25 mm² Single wire, material Silicone Single wire, color GN/YE External cable diameter 8.6 mm ±0.1 mm Jan 8, 2024, 9:55 AM Page 3 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Cable resistance ≤ 0.743 Ω/km Single-core wires for locking actuator Cable length 1.5 m Cable structure 4 x 0.5 mm² Single wire, material PVC Single wire, color BU/RD, BU/GN, BU/YE, BU/BN External cable diameter 1.6 mm ±0.20 mm Cable resistance ≤ 37.1 Ω/m Single-core wires for Pt 1000 temperature sensors Cable length 1m Cable structure 3 x 0.5 mm² Single wire, material PVC Single wire, color BN GN YE External cable diameter 1.6 mm ±0.20 mm Cable resistance ≤ 37.1 Ω/m Single-core wires for communication Cable length 1m Cable structure 2 x 0.5 mm² Single wire, material PVC Single wire, color BK WH External cable diameter 1.6 mm ±0.20 mm Cable resistance ≤ 37.1 Ω/m Mechanical properties Mechanical data Insertion/withdrawal cycles > 10000 Insertion force < 100 N Withdrawal force < 100 N Environmental and real-life conditions Ambient conditions Degree of protection (Vehicle charging inlet) IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standardcompliant products) IP67 (Inner area of vehicle charging inlet) Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude 4000 m (above sea level) Jan 8, 2024, 9:55 AM Page 4 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Standards and regulations Standards Standards/regulations IEC 62196-2 IEC 62196-3 SAE J1772 Mounting Mounting type Front and rear mounting (0 to 90 degree frontal inclination possible) Mounting hole diameter 6.70 mm (ø) Fixing screws M6 Screws included in the scope of delivery none Jan 8, 2024, 9:55 AM Page 5 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Drawings Dimensional drawing 122,8 108 50,8 6,9 32 27,4 9,4 116,7 80,8 83 13,8 165,2 137,4 117,6 14 90 97,9 Ø 11 103 Dimensional drawing Jan 8, 2024, 9:55 AM Page 6 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Schematic diagram DC [I] DC [II] DC [III] DC [IV] DC [V] Operating instructions Connection diagram Installation positions Jan 8, 2024, 9:55 AM Page 7 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 T [°C] Schematic diagram Charging Shutdown shutdown threshold RPTC [Ω] Temperature sensor technology resistance range at AC contacts Jan 8, 2024, 9:55 AM Page 8 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 M [V] Diagram 24 12 0 -12 -24 0 200 400 600 t [ms] RL RU 800 1000 1200 1400 1600 0 200 400 600 800 1000 1200 1400 1600 t [ms] Locking states of the locking actuator Jan 8, 2024, 9:55 AM Page 9 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Connection diagram L2/N CP L1 CS PE DC- DC+ Pin assignment of vehicle charging inlets Jan 8, 2024, 9:55 AM Page 10 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Connection diagram RL RU X₁ X₂ RU = 1 k X₃ X (mm) RL = 11 k Detection for Vehicle Connector Schematic diagram DC AC The Combined Charging System (CCS) principle - standard-compliant charging system for electric vehicles, which supports both conventional AC charging and fast DC charging. Both Vehicle Connectors fit into the CCS Vehicle Inlet. Jan 8, 2024, 9:55 AM Page 11 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Dimensional drawing Actuator 0,8 m = ±150 mm Signal AC PE DC (+) DC (–) Reference points for measuring the line length  [°C] Diagram 120 100 80 60 40 20 0 -20 -40 -60 800 1 1 = T(RPt 1000) = a * RPt 1000 - b  VAR = +25 °C 900 1000 1100 1200 1300 1400 1500 RPt 1000[Ω] Pt 1000 characteristic curve at an ambient temperature of 25°C for temperature measurement at the DC contacts Jan 8, 2024, 9:55 AM Page 12 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Schematic diagram + BU/RD 0,5 mm² M R2 10k R1 BU/GN 0,5 mm² 1k BU/YE 0,5 mm² - BU/BN 0,5 mm² Block diagram of the locking actuator Jan 8, 2024, 9:55 AM Page 13 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1211606  cULus Recognized Approval ID: E473195-20210730 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 1000 V 250 A - - Jan 8, 2024, 9:55 AM Page 14 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Classifications ECLASS ECLASS-11.0 27144706 ECLASS-13.0 27144706 ECLASS-12.0 27144706 ETIM ETIM 9.0 EC002898 UNSPSC UNSPSC 21.0 39121800 Jan 8, 2024, 9:55 AM Page 15 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Environmental product compliance REACh SVHC Lead 7439-92-1 DOTE 15571-58-1 Dechlorane Plus China RoHS Environmentally Friendly Use Period = 10; For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:55 AM Page 16 (17) CHARX T1HBI12-DC250-2,0M1 - Vehicle charging inlet 1211606 https://www.phoenixcontact.com/us/products/1211606 Accessories CHARX T1HBI-DUST-COVER-SET - Protective cover 1305482 https://www.phoenixcontact.com/us/products/1305482 CHARX connect universal, Protective cover, Accessories, for vehicle charging inlet, CCS type 1, Plug-on assembly, housing: black CHARX T1HI-ELOCK12V - Locking 1331528 https://www.phoenixcontact.com/us/products/1331528 CHARX connect universal, Locking, Accessories, for mounting on vehicle charging inlets, Type 1, IEC 61851-1, Single wires, length: 1 m, locking actuator: 12 V, 4-pos. Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:55 AM Page 17 (17)