https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Tool bag, equipped with: cable cutter, diagonal cutter, stripping pliers, NYM stripping tool, stripping tool for
removing sheath, crimping pliers, crimping die for ferrules, combination, needle-nose, and water pump pliers,
VDE screwdriver, bladed: 0.4 x 2.5/0.5 x 3.0/1.0 x 4.0/1.0 x 6.5, Philips: PHO/PH1/PH2, voltage tester, control
cabinet key, knife, tape measure
Your advantages
Rugged and heavy-duty tool bags
Universal tool sets, with cutting, stripping, crimping, and testing tools from the TOOL fox tool range
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356528399
Weight per Piece (excluding packing)
4,860.000 g
Custom tariff number
82060000
Country of origin
Germany
Technical data
Dimensions
Length (b)
290 mm
Width (a)
185 mm
Height (c)
220 mm
Environmental Product Compliance
California Proposition 65
Further information on California's prop. 65 is available under "Downloads"
in the manufacturer's declaration
05/19/2021 Page 1 / 7
https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Articles in set
Diagonal cutter - CUTFOX-S VDE - 1212207
Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
Cable-cutting tool - CUTFOX 18 - 1212129
Cable cutter, angled, for copper and aluminum up to 18 mm diameter (up to 50 mm²)
Stripping tool - WIREFOX 10 VDE - 1212366
Stripping pliers, for removing the sheath from cables up to 5 mm in diameter, for stripping conductors with a cross section
of up to 10 mm², scale for measuring the stripping length; VDE-tested.
Stripping tool - WIREFOX-D 13 - 1212162
Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping
0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife
Stripping tool - WIREFOX-D 28 - 1212174
Stripping tool, for stripping lines of Ø 8 - 28 mm
05/19/2021 Page 2 / 7
https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Articles in set
Crimping pliers - CRIMPFOX-M - 1212072
Basic pliers, for accommodating dies for a wide range of type of contacts
Replacement die - CRIMPFOX-M 10/DIE - 1212080
Die, for Crimpfox-M, for ferrules 0.25 - 10 mm², packed in a serial storage box
Tool - UNIFOX-CE VDE - 1212203
Combination pliers, angled design, with opening spring and locking device, cross-notched grip area, integrated M8 - M10
ring wrench, VDE 1000 V AC/1500 V DC tested
Tool - UNIFOX-P VDE - 1212204
Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested
Tool - UNIFOX-WP - 1212365
Water pump pliers, with groove joint, grip areas with dual notching, acc. to VDE ISO 8976
05/19/2021 Page 3 / 7
https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Articles in set
Screwdriver - SZS 0,4X2,5 VDE - 1205037
Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 0,5X3,0 VDE - 1207404
Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X6,5 VDE - 1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Screwdriver - SZK PH0 VDE - 1205147
Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
05/19/2021 Page 4 / 7
https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Articles in set
Screwdriver - SZK PH1 VDE - 1205150
Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
Screwdriver - SZK PH2 VDE - 1205163
Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
Voltage tester - DUSPOL EXPERT - 1209091
Voltage tester, for DC and AC voltages from 12 V to 1000 V AC/1000 V DC, IP65
Control cabinet key - USS 4 - 1203149
Control cabinet key, metal, for all common types of control cabinet
Tool bag, unequipped - TOOL-CARRIER EMPTY - 1212499
Tool bag, unequipped
05/19/2021 Page 5 / 7
https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Articles in set
Measuring instrument - MEASURING TAPE 5M I/M - 1200304
Measuring tape with automatic tape feed and locking mechanism, measuring rail: imperial/metric, length: 5 m
Classifications
eCl@ss
eCl@ss 10.0.1
21045003
eCl@ss 11.0
21045003
eCl@ss 4.0
21043000
eCl@ss 4.1
21043000
eCl@ss 5.0
21049000
eCl@ss 5.1
21049000
eCl@ss 6.0
21049000
eCl@ss 7.0
21045003
eCl@ss 9.0
21045003
ETIM
ETIM 3.0
EC000149
ETIM 4.0
EC000149
ETIM 6.0
EC000149
ETIM 7.0
EC000149
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
27113201
UNSPSC 18.0
27113201
UNSPSC 19.0
27113201
UNSPSC 20.0
27113201
UNSPSC 21.0
27113201
05/19/2021 Page 6 / 7
https://www.phoenixcontact.com/us/products/1212503
Tool bag, equipped - TOOL-CARRIER - 1212503
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
RU CDE.AI30.B.01750
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
05/19/2021 Page 7 / 7
