1212629

https://www.phoenixcontact.com/us/products/1212629 Toolbox - TOOL-CASE - 1212629 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Toolbox, equipped with: cable tools, lateral tools, micro cutters, stripping tools, and dismantling tools, crimping tool set, combination, needle-nose, and water pump pliers, VDE bladed screwdrivers and Phillips screwdrivers, control cabinet key, voltage tester, ferrule box, blades, tape measure, continuity tester, marking tool, ring, openend, and adjustable wrench set, T-handle wrench, safety glasses, hammer, 41-part ratchet socket wrench set, 1/4" Key commercial data Packing unit 11 Custom tariff number 82060000 Country of origin Germany Technical data Dimensions Length (b) 510 mm Height 270 mm Width (a) 260 mm Articles in set Cable-cutting tool - CUTFOX 12 - 1212128 Cable cutter, for copper and aluminum up to 12 mm diameter (up to 35 mm²)     Cable-cutting tool - CUTFOX-S VDE - 1212207 Diagonal cutter for copper and aluminum conductors, VDE-tested     24.10.2013   Page 1 / 7 https://www.phoenixcontact.com/us/products/1212629 Toolbox - TOOL-CASE - 1212629 Articles in set Diagonal cutter - MICROFOX-SB - 1212489 Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter     Stripping tool - WIREFOX 10 - 1212150 Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Stripping tool - WIREFOX-D 13 - 1212162 Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife     Stripping tool - WIREFOX-D 28 - 1212174 Stripping tool, for stripping lines of Ø 8 - 28 mm     Stripping tool - WIREFOX-D 11 - 1212160 Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm     24.10.2013   Page 2 / 7 https://www.phoenixcontact.com/us/products/1212629 Toolbox - TOOL-CASE - 1212629 Articles in set Crimping pliers set - CRIMPFOX-M SET - 1212093 Crimping pliers set, consisting of CRIMPFOX-M (pliers) and dies for insulated cable lugs 0.5 - 2.5 mm² (1212074), noninsulated conduit lugs 0.5 -6 mm² (1212079) and ferrules 0.25 - 10 mm² (1212080) and 16/25 mm² (1212081).     Replacement die - CRIMPFOX-M RCI 6/DIE - 1212073 Die, for Crimpfox-M, for insulated cable lugs 0.1 - 0.4 mm² and 4 - 6 mm² (light green, yellow), packed in a serial storage box     Tool - UNIFOX-C VDE - 1212202 Combination pliers, cross-notched grip area, integrated M8 - M10 ring wrench, VDE 1000 V AC/1500 V DC tested     Tool - UNIFOX-P VDE - 1212204 Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested     Tool - UNIFOX-WP - 1212365 Water pump pliers, with groove joint, grip areas with dual notching, acc. to VDE ISO 8976     24.10.2013   Page 3 / 7 https://www.phoenixcontact.com/us/products/1212629 Toolbox - TOOL-CASE - 1212629 Articles in set Screwdriver - SZS 0,4X2,5 VDE - 1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip     Screwdriver - SZS 0,5X3,0 VDE - 1207404 Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip     Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Screwdriver - SZS 1,0X6,5 VDE - 1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip     Screwdriver - SZK PH0 VDE - 1205147 Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip     24.10.2013   Page 4 / 7 https://www.phoenixcontact.com/us/products/1212629 Toolbox - TOOL-CASE - 1212629 Articles in set Screwdriver - SZK PH1 VDE - 1205150 Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip     Screwdriver - SZK PH2 VDE - 1205163 Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip     Voltage tester - DUSPOL EXPERT - 1209091 Voltage tester, for DC and AC voltages from 12 V to 1000 V AC/1100 V DC, IP65     Control cabinet key - USS 4 - 1203149 Control cabinet key, metal, for all common types of control cabinet     Range box - AI SORTI BOX RD - 3202960 Range box, Color: red     24.10.2013   Page 5 / 7 https://www.phoenixcontact.com/us/products/1212629 Toolbox - TOOL-CASE - 1212629 Articles in set Range box - AI-TWIN SORTI BOX BU - 3202986 Range box, Color: blue     Toolbox - TOOL-CASE EMPTY - 1212628 Tool case, empty, can be locked, with rubber straps to hold tools in place     Classifications eCl@ss eCl@ss 4.0 21040301 eCl@ss 4.1 21040301 eCl@ss 5.0 21043090 eCl@ss 5.1 21043090 eCl@ss 6.0 21049190 eCl@ss 7.0 21049190 eCl@ss 8.0 21049190 ETIM ETIM 3.0 EC000149 ETIM 4.0 EC002498 ETIM 5.0 EC000149 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 24.10.2013   Page 6 / 7 https://www.phoenixcontact.com/us/products/1212629 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 24.10.2013   Page 7 / 7