1271830

https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) CHARX connect, Vehicle charging inlet, Locking actuator right, For charging electric vehicles (EV) with alternating current (AC), For installation in electric vehicles (EV), AC type 2, IEC 62196-2, 32 A / 250 V (AC), length: 2 m, Locking actuator: 12 V, 4-position, M6, Generation 4, A protective cap is supplied as standard for the AC contacts. The figure shows a version of the product Product Description Vehicle charging inlet for charging with alternating current (AC), compatible with type 2 AC vehicle charging connectors (EVSE), for installation in electric vehicles for e-mobility (EV). Your advantages  Uniform, space-saving dimensions and screw connection points for all Phoenix Contact AC vehicle charging inlets  Silver-plated surface of the power and signal contacts  Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001  Material data available in the IMDS (International Material Data System of the automotive industry)  Tested in accordance with selected tests of automotive standards LV124, LV214, LV215-2  Manual emergency release of the locking actuator  Integrated interlock during charging  Integrated temperature sensors for monitoring the temperature at the power contacts Key Commercial Data Packing unit 1 pc GTIN GTIN 4063151461294 Custom tariff number 85444290 Country of origin Germany 08/23/2021   Page 1 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Technical data Product definition Type Locking actuator right Application For charging electric vehicles (EV) with alternating current (AC) For installation in electric vehicles (EV) Design Generation 4 Standards/regulations IEC 62196-2 Charging standard AC type 2 Charging mode Mode 2, 3 Note A protective cap is supplied as standard for the AC contacts. Note on the connection method Crimp connection, cannot be disconnected Dimensions Height 90 mm Width 90 mm Depth 111.4 mm Bore dimensions 73 mm x 73 mm, 73 mm x 73 mm Conductor length 2 m (AC sheathed cable) 1 m (Locking actuator cables) 1 m (Temperature sensors cables) 1 m (Communications cables) Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. altitude 4000 m (above sea level) Degree of protection IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) IP67 (Inner area of vehicle charging inlet) Electrical properties Charging power (nominal operation) 8 kW Type of charging current AC single-phase Number of power contacts 3 (L1, N, PE) Rated current of power contacts 32 A AC Rated voltage for power contacts 250 V AC Number of signal contacts 2 (CP, PP) Rated current for signal contacts 2A Rated voltage for signal contacts 30 V AC 08/23/2021   Page 2 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Technical data Electrical properties Type of signal transmission Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121 Note on the connection method Crimp connection, cannot be disconnected Insulation resistance of neighboring contacts > 200 MΩ Resistor coding 4.7 kΩ (between PE and PP) Temperature monitoring AC contacts: PTC chain (DIN˽EN˽60738-1) Mechanical properties Insertion/withdrawal cycles > 10000 Insertion force < 75 N Withdrawal force < 75 N Mounting Restrictions to mounting position Only 0 to 90 degree frontal inclination possible, see figure Mounting position of the locking actuator Right-side Mounting hole diameter 6.70 mm (ø) Required mounting screws M6 Screws included in the scope of delivery none Design Design line Generation 4 Housing color black Customer variations On request Material Material Plastic Flammability rating V0 Material surface of contacts Ag Locking Locking type Locking in the inserted state with a locking mechanism AC cable Cable structure 3 x 6 mm² External cable diameter 13.8 mm ±0.3 mm Cable resistance ≤ 3.2 Ω/km Outer sheath, material Silicone External sheath, color orange Minimum bending radius 3 x D Cable weight approx. 385 kg/km Locking actuator cable 08/23/2021   Page 3 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Technical data Locking actuator cable Cable structure 4 x 0.5 mm² External cable diameter 1.6 mm -0.2 mm Cable resistance ≤ 37.1 Ω/km Outer sheath, material PVC Single wire, color BU/RD, BU/GN, BU/YE, BU/BN Minimum bending radius 15 mm Cable weight 7 kg/km Temperature sensor cable Cable structure 2 x 0.5 mm² External cable diameter 1.6 mm -0.2 mm Cable resistance ≤ 37.1 Ω/km Outer sheath, material PVC Single wire, color brown, gray Minimum bending radius 15 mm Cable weight 7 kg/km Cable communication Cable structure 0.5 mm² + 0.5 mm² External cable diameter 1.6 mm -0.2 mm Cable resistance ≤ 37.1 Ω/km Outer sheath, material PVC Single wire, color black PP/CS white CP Minimum bending radius 15 mm Cable weight 7 kg/km Locking actuator Number of positions of theconnectors 4 Operating voltage 12 V (Typical power supply at the motor) Possible power supply range at the motor 9 V ... 16 V Maximum voltage for locking detection 12 V Typical motor current for locking 0.25 A Reverse current of the motor max. 1.5 A Max. dwell time with reverse current 1s Recommended adaptation time 600 ms Pause time after entry or exit path 3s Service life insertion cycles > 10000 load cycles Ambient temperature (operation) -40 °C ... 80 °C 08/23/2021   Page 4 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Technical data Locking actuator Cable length 1m Cable structure 4 x 0.5 mm² Lock recognition available Mechanical emergency release available Temperature monitoring, AC contacts Type of sensor PTC chain Standards/regulations DIN˽EN 60738-1 Recommended measured current ≤ 1 mA (Umax= 16 V DC) Tolerance at the sensor with the recommended measured current ±5K Temperature range -40 °C ... 130 °C Drawings M [V] Diagram Schematic diagram 24 + BU/RD 0,5 mm² 12 " M 0 -12 R2 10k R1 BU/GN 0,5 mm² 1k BU/YE 0,5 mm² - BU/BN 0,5 mm² -24 0 200 400 600 800 1000 1200 1400 1600 t [ms] Block diagram of the locking actuator RL ! RU 0 200 400 600 800 1000 1200 1400 1600 t [ms] Locking states of the locking actuator 08/23/2021   Page 5 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Connection diagram Dimensional drawing 112,8 PP 111,4 □90 CP 101,3 □73 6,85 10 60 L3 Ø6,7 Pin assignment of Vehicle Inlet 11,8 L2 N 95,1 L1 Ø83 23 PE Ø11 Dimensional drawing T [°C] Schematic diagram Charging Shutdown shutdown threshold RPTC [Ω] Temperature sensor technology resistance range at AC contacts 08/23/2021   Page 6 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Connection diagram CP PP N PE L1 L2 L3 N L3 L2 L1 PP PP L2 N L3 CP PE CP PE L1 PP L2 L1 L3 PE N CP Installation positions 08/23/2021   Page 7 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Connection diagram AC Terminology definition 08/23/2021   Page 8 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Functional drawing AC [I] AC [II] AC [III] AC [IV] [V] Operating instructions AC 08/23/2021   Page 9 / 11 https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Schematic diagram RL RU X1 X2 X3 X4 X (mm) CHARX T2HCI12...: RU = 1 kΩ RL = 11 kΩ RU = 1 kΩ CHARX T2HCI24...: RU = ∞ kΩ RL = 0 kΩ RU = ∞ kΩ 08/23/2021   Page 10 / 11 Detection for Vehicle Connector https://www.phoenixcontact.com/us/products/1271830 Vehicle charging inlet - CHARX T2HCI12-1AC32-2,0M2 - 1271830 Classifications eCl@ss eCl@ss 10.0.1 27144706 eCl@ss 11.0 27144706 ETIM ETIM 7.0 EC002898 Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 08/23/2021   Page 11 / 11