https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in
connection, Rated cross section: 6 mm², cross section: 0.5 mm² - 10 mm², mounting type: NS 35/7,5, NS 35/15,
color: green
Your advantages
Clear wiring, thanks to lateral conductor entry
The compact design enables wiring in a confined space
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
100 pc
GTIN
GTIN
4063151524265
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of positions
1
Number of rows
1
Number of connections
2
Nominal cross section
6 mm²
Color
green
10/14/2021 Page 1 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Technical data
General
Insulating material
PA 6.6
Flammability rating according to UL 94
V0
Area of application
Railway industry
Machine building
Plant engineering
Process industry
Mounting type
NS 35/7,5
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum load current
52 A (with 10 mm² conductor cross section, rigid)
Nominal current IN
41 A
Nominal voltage UN
1000 V
Open side panel
Yes
General information
The max. load current must not be exceeded by the total current of all
connected conductors.
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
6 mm² / 1.4 kg
10 mm² / 2 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.05 mm²
Tractive force setpoint
20 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
10/14/2021 Page 2 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Technical data
General
Tractive force setpoint
90 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s²)²/Hz
Acceleration
3.12g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
10/14/2021 Page 3 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
End cover width
2.2 mm
Length
84.7 mm
Height
57.6 mm
Height NS 35/7,5
59.1 mm
Height NS 35/15
66.6 mm
Connection data
Connection method
Push-in connection
Stripping length
10 mm ... 12 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1.5 mm² 10 mm² 16 8
Conductor cross section solid min.
1.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
16
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
10/14/2021 Page 4 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Technical data
Ambient conditions
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1
27141120
eCl@ss 11.0
27141120
eCl@ss 9.0
27141120
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
RU CDE.BL08.B.00644
10/14/2021 Page 5 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile,
color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile,
color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, acc. to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
10/14/2021 Page 6 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile,
color: silver
10/14/2021 Page 7 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile,
color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
10/14/2021 Page 8 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile
2.3 mm, color: silver
End block
End clamp - E/UK - 1201442
End clamp, Mounting on a DIN rail NS 32 or NS 35, material: PA, color: gray
10/14/2021 Page 9 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
Cover - D-PTV 6-QUATTRO - 1180930
Cover, length: 84.7 mm, width: 2.2 mm, height: 51.4 mm, color: gray
10/14/2021 Page 10 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Cover segment - DS-PTV 6 - 1182214
Cover segment, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
10/14/2021 Page 11 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, color: red
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, pitch: 8.2 mm, color: red
10/14/2021 Page 12 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, pitch: 8.2 mm, color: red
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, pitch: 8.2 mm, color: red
Plug-in bridge - FBS 6-8 - 3032470
Plug-in bridge, pitch: 8.2 mm, color: red
Plug-in bridge - FBS 10-8 - 3030323
Plug-in bridge, pitch: 8.2 mm, color: red
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, pitch: 8.2 mm, color: orange
10/14/2021 Page 13 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, pitch: 8.2 mm, color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, pitch: 8.2 mm, color: orange
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, pitch: 8.2 mm, color: orange
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, color: blue
Plug-in bridge - FBS 3-8 BU - 3032570
Plug-in bridge, pitch: 8.2 mm, color: blue
10/14/2021 Page 14 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Plug-in bridge - FBS 4-8 BU - 3032583
Plug-in bridge, pitch: 8.2 mm, color: blue
Plug-in bridge - FBS 5-8 BU - 3032596
Plug-in bridge, pitch: 8.2 mm, color: blue
Plug-in bridge - FBS 6-8 BU - 3032677
Plug-in bridge, pitch: 8.2 mm, color: blue
Plug-in bridge - FBS 10-8 BU - 3032606
Plug-in bridge, pitch: 8.2 mm, color: blue
Plug-in bridge - FBS 2-8 GY - 3032621
Plug-in bridge, pitch: 8.2 mm, color: gray
10/14/2021 Page 15 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Plug-in bridge - FBS 3-8 GY - 3032622
Plug-in bridge, pitch: 8.2 mm, color: gray
Plug-in bridge - FBS 4-8 GY - 3032635
Plug-in bridge, pitch: 8.2 mm, color: gray
Plug-in bridge - FBS 5-8 GY - 3032648
Plug-in bridge, pitch: 8.2 mm, color: gray
Plug-in bridge - FBS 6-8 GY - 3032664
Plug-in bridge, pitch: 8.2 mm, color: gray
Plug-in bridge - FBS 10-8 GY - 3032651
Plug-in bridge, pitch: 8.2 mm, color: gray
10/14/2021 Page 16 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Plug-in bridge - FBS 1/4/7/10-8 - 3032402
Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,4,7,10, color: red
Plug-in bridge - FBS 1/3/5-8 - 3032389
Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,3,5, color: red
Plug-in bridge - FBS 1/5-8 - 3032381
Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,5, color: red
Plug-in bridge - FBS 1/3-8 - 3032363
Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,3, color: red
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
10/14/2021 Page 17 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 56
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual
labels: 42
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2
mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm,
lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x
8.15 mm, Number of individual labels: 10
10/14/2021 Page 18 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Zack Marker strip, flat - ZBF 8 CUS - 0825030
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels:
10
Zack Marker strip, flat - ZBF 8,LGS:FORTL.ZAHLEN - 0808804
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 101 ...
110, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm,
Number of individual labels: 10
Marker for terminal blocks - UC-TMF 8 CUS - 0824654
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual
labels: 56
Marker for terminal blocks - UCT-TMF 8 CUS - 0829672
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm, Number of individual
labels: 42
Partition plate
Spacer plate - DP PS-8 - 3036741
Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red
10/14/2021 Page 19 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Planning and marking software
Software - PROJECT COMPLETE - 1050453
Intuitive planning and marking software for configuring terminal strips and for professional marking of marking materials
for terminal blocks, conductors, cables, devices, and systems. The software is available for download
Reducing bridge
Reducing bridge - RB ST 6-1,5/S - 3213250
Reducing bridge, pitch: 8 mm, color: red
Screwdriver tools
Screwdriver - SZK PH0 VDE - 1205147
Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
Screwdriver - SZK PH1 VDE - 1205150
Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
10/14/2021 Page 20 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Screwdriver - SZK PH2 VDE - 1205163
Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
Philips screwdriver - SZK PZ0 VDE - 1206447
Screwdriver, PZ crosshead, VDE insulated, size: PZ 0 x 80 mm, 2-component grip, with non-slip grip
Philips screwdriver - SZK PZ1 VDE - 1206450
Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip
Philips screwdriver - SZK PZ2 VDE - 1206463
Screwdriver, PZ crosshead, VDE insulated, size: PZ 2 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 0,6X3,5 VDE - 1212602
Screwdriver, slot-headed, VDE insulated, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
10/14/2021 Page 21 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Screwdriver - SZS 0,8X4,0 VDE - 1212508
Screwdriver, slot-headed, VDE insulated, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X5,5 VDE - 1209114
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 5.5 x 125 mm, 2-component grip, with non-slip grip
Screwdriver - SZS 1,0X6,5 VDE - 1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels:
10
10/14/2021 Page 22 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size:
7.6 x 10.5 mm, Number of individual labels: 42
Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TMF 8 - 0818137
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56
Marker for terminal blocks - UCT-TMF 8 - 0828748
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size:
7.4 x 4.7 mm, Number of individual labels: 42
Test plug terminal block
10/14/2021 Page 23 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs - PS-8 - 3031005
Test plugs, Modular test plug, color: red
Test plugs - PS-8/2,3MM RD - 3048564
Test plugs, color: red
Test socket
Test adapter - PAI-4-FIX BU - 3032729
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: blue
Test adapter - PAI-4-FIX OG - 3034455
4 mm test adapter, for terminal blocks with 8.2 mm pitch
10/14/2021 Page 24 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Test adapter - PAI-4-FIX YE - 3032745
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: yellow
Test adapter - PAI-4-FIX RD - 3032732
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: red
Test adapter - PAI-4-FIX GN - 3032758
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: green
Test adapter - PAI-4-FIX BK - 3032774
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: black
Test adapter - PAI-4-FIX GY - 3032790
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: gray
10/14/2021 Page 25 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Test adapter - PAI-4-FIX VT - 3032761
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: violet
Test adapter - PAI-4-FIX BN - 3032787
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 8.2 mm pitch, color: brown
Test adapter - PAI-4-FIX WH - 3032797
4 mm test adapter, for terminal blocks with 8.2 mm pitch
Test adapter - PAIS-4-FIX GY - 3032791
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: gray
Test adapter - PAIS-4-FIX BK - 3032792
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: black
10/14/2021 Page 26 / 28
https://www.phoenixcontact.com/us/products/1291930
Feed-through terminal block - PTV 6-QUATTRO GN - 1291930
Accessories
Test adapter - PAIS-4-FIX RD - 3032793
Test adapter, Do not plug in while the power is connected, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm,
and 8.2 mm pitch, color: red
Test adapter - PAIS-4-FIX BU - 3032798
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: blue
Test adapter - PAIS-4-FIX YE - 3032799
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: yellow
Test adapter - PAIS-4-FIX GN - 3032801
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: green
Test adapter - PAIS-4-FIX VT - 3032802
Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test
plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: violet
10/14/2021 Page 27 / 28
https://www.phoenixcontact.com/us/products/1291930
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
10/14/2021 Page 28 / 28
