CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 V DC or 24 V DC. EX e
approval for zone 2. For DIN rail installation via the CAPAROC current rails.
Your advantages
• The customizable standard, thanks to individual combinations of the future-proof modular system
• Easy operation for everyone through tool-free assembly, uninterrupted installation, and transparent operating state
• Strikingly simple design-in with extensive support from the selection up to digital services
Commercial data
Item number
1344363
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
CL11
Product key
CLA231
GTIN
4063151658403
Weight per piece (including packing)
129 g
Weight per piece (excluding packing)
91.9 g
Customs tariff number
85363010
Country of origin
DE
Jan 8, 2024, 9:55 AM
Page 1 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Technical data
Notes
General
Note
LABS release – in accordance with test specification VW PV 3.
10.7:2005-0
When connecting the conductor, make sure that the CAPAROC
modules are not pulled apart due to tensile force. Gaps must not
be created between the modules.
Observe the specified conditions for use in potentially explosive
areas. Install the device in a suitable approved housing with at
least IP54 degree of protection that meets the requirements of
IEC/EN 60079-0. Also observe the requirements of
IEC/EN 60079-14.
Product properties
Type
Plug-in module
Product type
Device circuit breakers
Product family
CAPAROC
Number of slots
2
Insulation characteristics
Protection class
III
Pollution degree
2
Electrical properties
General
Operating voltage
10 V DC ... 30 V DC
Rated voltage
12 V DC
24 V DC
Rated current IN
45 A DC (Total current input)
Rated surge voltage
0.5 kV
Tripping method
E (electronic)
Dielectric strength
35 V DC (Load circuit)
Efficiency
> 99 %
Closed circuit current I0
typ. 9 mA (no load at 24 V)
Power dissipation
typ. 0.22 W (no load at 24 V)
< 1.5 W (in nominal operation at 24 V and 45 A)
Temperature derating
45 A (Total current at 40°C)
30 A (Total current at 65 °C)
MTBF (IEC 61709, SN 29500)
18886912.65 h (at 25 °C with 21 % load)
5907048.64 h (at 40°C with 34.25% load)
933563.97 h (at 40°C with 100% load)
Voltage drop
0.03 V (at 45 A)
Jan 8, 2024, 9:55 AM
Page 2 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Reset
Input voltage range
7 V DC ... 30 V DC (Reset with falling edge)
Current consumption
typ. 0.5 mA (at 24 V DC)
Pulse length
≥ 50 ms
Stripping length
8 mm
Conductor cross section rigid
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic
sleeve
0.2 mm² ... 1.5 mm²
Status output
Output voltage
max. 30 V DC (Input voltage ±5% in the event of no error)
0 V DC (Error)
Output current
max. 20 mA
Stripping length
8 mm
Conductor cross section rigid
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic
sleeve
0.2 mm² ... 1.5 mm²
Status output
Output voltage
max. 30 V DC (Input voltage ±5% when I >80% at at least one
channel)
Output current
max. 20 mA
Stripping length
8 mm
Conductor cross section rigid
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic
sleeve
0.2 mm² ... 1.5 mm²
Connection data
Main circuit IN+
Connection method
Push-in connection
Stripping length
18 mm
Conductor cross section rigid
0.5 mm² ... 16 mm²
Conductor cross section AWG
20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic
sleeve
0.5 mm² ... 16 mm²
Main circuit INConnection method
Push-in connection
Stripping length
18 mm
Jan 8, 2024, 9:55 AM
Page 3 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Conductor cross section rigid
0.5 mm² ... 16 mm²
Conductor cross section AWG
20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic
sleeve
0.5 mm² ... 16 mm²
Signaling
Power (PWR) LED green
lit (with no channel errors)
lit (Supply voltage in the nominal range)
flashing (3 x on deactivation of programming lock)
Power (PWR) LED red
lit (Supply voltage outside the nominal range)
Dimensions
Dimensional drawing
Width
12.4 mm
Height
132.4 mm
Depth
111.3 mm (incl. DIN rail 7.5 mm)
Material specifications
Material
PA 6
PA 6
PA 6
PC
Flammability rating according to UL 94
V-0
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-30 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Altitude
≤ 4000 m (amsl)
Humidity test
96 h, 95 % RH, 40 °C
Shock (operation)
30g (11 ms period, half-sine shock pulse, according to IEC
60068-2-27)
25g (6 ms duration, half-sine shock pulse in accordance with
IEC 60068-2-27, continuous shock)
Vibration (operation)
5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z)
Approvals
UL approval
Identification
UL/C-UL Listed UL 508
UL 121201 Class I, Division 2, Groups A, B, C, D, T4A
ATEX
Identification
TÜV 22 ATEX 8874 X
Jan 8, 2024, 9:55 AM
Page 4 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
II 3G Ex ec IIC T4 Gc
IECEx
Identification
IECEx TUR 22.0049X
II 3G Ex ec IIC T4 Gc
UKCA Ex (UKEX)
Identification
TÜV 22 UKEX 7109 X
II 3G Ex ec IIC T4 Gc
Standards and regulations
Standards/specifications
EN 61000-6-2
Note
EMC – Immunity for industrial areas
Standards/specifications
EN 61000-6-3
Note
EMC – Emission for residential, business and commercial
properties and small operations
Standards/specifications
EN 60068-2-78
Note
Environmental influences – Moisture and heat, constant
Standards/specifications
EN 50178
Note
Equipping power installations with electronic equipment
Standards/specifications
EN 60068-2-27
Note
Environmental influences – Shocks
Standards/specifications
IEC 60079-7
Note
Explosive atmospheres – Part 7: Equipment protection by
increased safety “e”
Standards/specifications
IEC 60079-0
Note
Explosive atmospheres – Part 0: Equipment – General
requirements
Mounting
Mounting type
pluggable onto CAPAROC CR… current rail
Jan 8, 2024, 9:55 AM
Page 5 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Drawings
Block diagram
IN+ 1.1
IN+ 5.1
IN- 2.1
PWR
S
RST
80%
µC
IN- 6.1
Status
LED
Dimensional drawing
111,3
132,4
12,4
Jan 8, 2024, 9:55 AM
Page 6 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Schematic diagram
≤ 20
When using the power module with status output and reset input (CAPAROC PM S-R), max. 20 circuit breaker modules can be set. Any number of
extra potential distribution modules can be added.
Jan 8, 2024, 9:55 AM
Page 7 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
I [A]
Diagram
50
45
40
35
30
25
20
15
10
5
0
-40 -30 -20 -10
0
10
20
30
40
50
60
70
[°C]
Max. permissible current in relation to the ambient temperature
Jan 8, 2024, 9:55 AM
Page 8 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1344363
UL Listed
cUL Listed
Approval ID: FILE E 123528
Approval ID: FILE E 123528
IECEx
Approval ID: IECEx TUR 22.0049X
cUL Listed
UL Listed
Approval ID: FILE E 483407
Approval ID: FILE E 483407
X
ATEX
UKCA-EX
Approval ID: TÜV 22 ATEX 8874 X
Approval ID: TÜV 22 UKEX 7109 X
cULus Listed
cULus Listed
Jan 8, 2024, 9:55 AM
Page 9 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Classifications
ECLASS
ECLASS-11.0
27140401
ECLASS-12.0
27140401
ECLASS-13.0
27140401
ETIM
ETIM 9.0
EC003538
Jan 8, 2024, 9:55 AM
Page 10 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
Mandatory accessories
CAPAROC CR 20 - Busbar
1110989
https://www.phoenixcontact.com/us/products/1110989
Busbar for CAPAROC system with 20
slots. For installation on a DIN rail.
CAPAROC CR 8 - Busbar
1115672
https://www.phoenixcontact.com/us/products/1115672
Busbar for the CAPAROC system with
8 slots. For installation on a DIN rail.
Accessories
CAPAROC E2 12-24DC/1-4A EX - Electronic circuit breaker
1344361
https://www.phoenixcontact.com/us/products/1344361
2-channel electronic circuit breaker
module for protecting 12 V DC and
24 V DC loads against overload and
short circuit. Nominal current
adjustable from 1 A to 4 A via step
switch. EX e approval for zone 2. For
DIN rail installation via the CAPAROC
current rails.
Jan 8, 2024, 9:55 AM
Page 11 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
CAPAROC E2 12-24DC/2-10A EX - Electronic circuit breaker
1344364
https://www.phoenixcontact.com/us/products/1344364
2-channel electronic circuit breaker
module for protecting 12 V DC and
24 V DC loads against overload and
short circuit. Nominal current
adjustable from 2 A to 10 A via step
switch. EX e approval for zone 2. For
DIN rail installation via the CAPAROC
current rails.
CAPAROC PD 0V - Potential distributors
1110987
https://www.phoenixcontact.com/us/products/1110987
Potential distributor with Push-in
connections for directly connecting the
0 V return conductor in the CAPAROC
system. For DIN rail installation via
the CAPAROC current rails.
UC-TM 12 - Marker for terminal blocks
0819194
https://www.phoenixcontact.com/us/products/0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 12 mm,
lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40
Jan 8, 2024, 9:55 AM
Page 12 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
UCT-TM 12 - Marker for terminal blocks
0829144
https://www.phoenixcontact.com/us/products/0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped, for terminal block width: 12
mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30
CAPAROC CR EXT20 - Busbar
1115674
https://www.phoenixcontact.com/us/products/1115674
Extension busbar with 20 slots for the
CAPAROC system. For installation on
a DIN rail.
CAPAROC CR EXT8 - Busbar
1110990
https://www.phoenixcontact.com/us/products/1110990
Extension busbar with 8 slots for
CAPAROC system. For installation on
a DIN rail.
Jan 8, 2024, 9:55 AM
Page 13 (14)
CAPAROC PM S-R EX - Power module
1344363
https://www.phoenixcontact.com/us/products/1344363
CAPAROC CR EXT4 - Busbar
1110991
https://www.phoenixcontact.com/us/products/1110991
Extension busbar with 4 slots for the
CAPAROC system. For installation on
a DIN rail.
CAPAROC CR CON - Metal part
1270955
https://www.phoenixcontact.com/us/products/1270955
Metal extension rails from connecting
CAPAROC initial busbars.
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 9:55 AM
Page 14 (14)