1350428

https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Test disconnect terminal block, nom. voltage: 1000 V, nominal current: 30 A, connection method: Push-in connection, Rated cross section: 6 mm², cross section: 0.5 mm² - 6 mm² , color: blue Your advantages  Increased safety with 1,000 V nominal voltage  The compact design allows an overall width the same as screw terminal blocks  Quick and easy actuation with the screw-free disconnect slide  Clearly visible and readily apparent switching state  Use of CLIPLINE complete standard accessories Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc Custom tariff number 85369010 Country of origin China Technical data General Number of rows 1 Number of connections 2 Potentials 1 Nominal cross section 6 mm² Color blue Insulating material PA Flammability rating according to UL 94 V0 Mounting type NS 35/15 12/09/2021   Page 1 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Technical data General Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum load current 30 A (with 6 mm² conductor cross section) Nominal current IN 30 A (with 6 mm² conductor cross section) Nominal voltage UN 1000 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of flexion and pull-out test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.5 mm² / 0.3 kg 6 mm² / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.5 mm² Tractive force setpoint 20 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of voltage-drop test Test passed Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1 Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature ≤ 45 K Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.5 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.15 kA Conductor cross section short circuit testing 4 mm² 12/09/2021   Page 2 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Technical data General Short-time current 1.25 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s²)²/Hz Acceleration 3.12g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 8.2 mm End cover width 2.2 mm Length 82 mm Height NS 35/7,5 54.5 mm Height NS 35/15 62 mm Connection data 12/09/2021   Page 3 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Technical data Connection data Connection method Push-in connection Stripping length 10 mm ... 12 mm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Connection only with corresponding crimp versions. Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² Connection only with corresponding crimp versions. Connection cross sections directly pluggable 0.75 mm² 6 mm² Conductor cross section solid min. 0.75 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Connection only with corresponding crimp versions. Conductor cross section flexible, with ferrule with plastic sleeve min. 1 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² Connection only with corresponding crimp versions. Internal cylindrical gage A4 B4 Ambient conditions Operating temperature -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Standards and Regulations Connection in acc. with standard IEC 60947-7-1 12/09/2021   Page 4 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Classifications eCl@ss eCl@ss 11.0 27141126 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 6.0 EC000902 ETIM 7.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / cULus Recognized Ex Approvals Approval details 12/09/2021   Page 5 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Approvals  CSA   http://www.csagroup.org/services-industries/product-listing/   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10 cULus Recognized    158887  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 26-10 26-10  E60425 Accessories Accessories Cover profile Cover profile - AP-ME METER - 3034361 Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m     Covering hood - AH-ME - 3240265 Cover, for the contact- and dust-protected encapsulation of the components     Cover profile carrier 12/09/2021   Page 6 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Cover profile carrier - APH-ME - 3034374 Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option     Cover profile carrier - APT-ME - 3034358 Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME     Crimping tool Crimping pliers - CRIMPFOX 6 - 1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 6S-F - 1212043 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp     Crimping pliers - CRIMPFOX 10S - 1212045 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry     12/09/2021   Page 7 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Crimping pliers - CRIMPFOX 10T-F - 1134913 Crimping pliers, type of contact: Insulated and uninsulated ferrules, standards/specifications: DIN 46228-1, DIN 46228-4, min. cross section: 0.14 mm², max. cross section: 10 mm², For TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, frontal insertion, compression: Trapezoidal crimp, black     Crimping pliers - CRIMPFOX 6-M - 1212720 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX 10 - 1212721 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 4 mm² ... 10 mm², lateral entry, trapezoidal crimp     Crimping pliers - CRIMPFOX DUO 10 - 1031721 Crimping pliers, type of contact: Insulated and uninsulated ferrules, min. cross section: 0.14 mm², max. cross section: 10 mm², for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, rotating die, lateral and frontal insertion, compression: Trapezoidal crimp, black/green     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver     12/09/2021   Page 8 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, acc. to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver     12/09/2021   Page 9 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver     12/09/2021   Page 10 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver     12/09/2021   Page 11 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     12/09/2021   Page 12 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories End cover End cover - D-PTVME 6/S - 1164789 End cover, length: 82 mm, width: 0.8 mm, height: 46.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     12/09/2021   Page 13 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBS 3-8 - 3030297 Plug-in bridge, pitch: 8.2 mm, color: red     12/09/2021   Page 14 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Plug-in bridge - FBS 4-8 - 3030307 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBS 5-8 - 3030310 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBS 6-8 - 3032470 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBS 10-8 - 3030323 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBS 1/3-8 - 3032363 Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,3, color: red     12/09/2021   Page 15 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Plug-in bridge - FBS 1/4-8 - 3032376 Plug-in bridge, pitch: 8.2 mm, pin assignment: 1, 4, color: red     Plug-in bridge - FBS 1/5-8 - 3032381 Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,5, color: red     Plug-in bridge - FBS 1/3/5-8 - 3032389 Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,3,5, color: red     Plug-in bridge - FBS 1/4/7/10-8 - 3032402 Plug-in bridge, pitch: 8.2 mm, pin assignment: 1,4,7,10, color: red     Plug-in bridge - FBS 1/3/5/7-8 - 3030396 Plug-in bridge, pitch: 8.2 mm, width: 55.7 mm, number of positions: 7, pin assignment: 1, 3, 5, 7, color: red     12/09/2021   Page 16 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Plug-in bridge - FBS 1/2/4-8 - 3032377 Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 3, pin assignment: 1,2,4, color: red     Plug-in bridge - FBSR 2-8 - 3033808 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBSR 3-8 - 3001597 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBSR 4-8 - 3000585 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBSR 5-8 - 3033809 Plug-in bridge, pitch: 8.2 mm, color: red     12/09/2021   Page 17 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Plug-in bridge - FBSR 10-8 - 3001599 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBSR 16-8 - 3033816 Plug-in bridge, pitch: 8.2 mm, color: red     Plug-in bridge - FBSR 1/6/11/14-8 - 3033822 Plug-in bridge, non-adjacent, pitch: 8.2 mm, pin assignment: 1, 6, 11, 14, color: red     Plug-in bridge - FBSR 1/6/11/16-8 - 3033820 Plug-in bridge, non-adjacent, pitch: 8.2 mm, pin assignment: 1, 6, 11, 16, color: red     Plug-in bridge - FBSR 1/7/13/16-8 - 3033821 Plug-in bridge, non-adjacent, pitch: 8.2 mm, pin assignment: 1, 7, 13, 16, color: red     12/09/2021   Page 18 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Plug-in bridge - FBS 2-8 CT - 3033830 Plug-in bridge, pitch: 8.2 mm, color: orange     Plug-in bridge - FBS 3-8 CT - 3033831 Plug-in bridge, pitch: 8.2 mm, color: orange     Plug-in bridge - FBS 4-8 CT - 3033832 Plug-in bridge, pitch: 8.2 mm, color: orange     Plug-in bridge - FBS 10-8 CT - 3033833 Plug-in bridge, pitch: 8.2 mm, color: orange     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, color: blue     12/09/2021   Page 19 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Plug-in bridge - FBS 3-8 BU - 3032570 Plug-in bridge, pitch: 8.2 mm, color: blue     Plug-in bridge - FBS 4-8 BU - 3032583 Plug-in bridge, pitch: 8.2 mm, color: blue     Plug-in bridge - FBS 5-8 BU - 3032596 Plug-in bridge, pitch: 8.2 mm, color: blue     Plug-in bridge - FBS 6-8 BU - 3032677 Plug-in bridge, pitch: 8.2 mm, color: blue     Plug-in bridge - FBS 10-8 BU - 3032606 Plug-in bridge, pitch: 8.2 mm, color: blue     Labeled terminal marker 12/09/2021   Page 20 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Zack marker strip - ZB 8 CUS - 0825011 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 8 CUS - 0824597 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56     Marker for terminal blocks - UCT-TM 8 CUS - 0829616 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 42     Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     12/09/2021   Page 21 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 8 CUS - 0825030 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 8,LGS:FORTL.ZAHLEN - 0808804 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 101 ... 110, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 8 CUS - 0824654 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56     Marker for terminal blocks - UCT-TMF 8 CUS - 0829672 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm, Number of individual labels: 42     Partition plate 12/09/2021   Page 22 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Separating plate - TS-PTVME 6/S - 1193381 Separating plate, length: 82 mm, width: 0.8 mm, height: 51.5 mm, color: gray     Spacer plate - DP PS-8 - 3036741 Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red     Screw bridge Screw bridge - SCBI 10-8,15 - 3245134 Screw bridge, with insulating collar, pitch: 8.2 mm, color: silver     Isolator bridge bar - SCBI 10-8,15 ISO - 3000417 Isolator bridge bar, for switchable cross bridges, with insulating collar, pitch: 8.2 mm, color: silver     Screwdriver tools Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     12/09/2021   Page 23 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Screwdriver - SF-SL 0,8X4,0-100 S-VDE - 1212588 Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Short-circuit connector Short-circuit connector - KSS 8 - 0311540 Short-circuit connector, pitch: 8 mm, color: black     Short-circuit connector - KSS 4- 8 - 0309549 Short-circuit connector, pitch: 8 mm, color: black     Short-circuit connector - KSSI 2-8 - 3000722 Short-circuit connector, pitch: 8 mm, color: black     Short-circuit connector - KSSI 4-8 - 3000735 Short-circuit connector, pitch: 8 mm, color: black     12/09/2021   Page 24 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Short-circuit connector - FBSRH 2-8 - 3033802 Short-circuit connector, pitch: 8.2 mm, color: red     Short-circuit connector - FBSRH 3-8 - 3033803 Short-circuit connector, pitch: 8.2 mm, color: red     Short-circuit connector - FBSRH 4-8 - 3033804 Short-circuit connector, pitch: 8.2 mm, color: red     Switching jumper Switching jumper - SB-MER 2-8 - 3000587 Switching jumper, pitch: 8.2 mm, color: gray/orange     Switching jumper - SB-MER 3-8 - 3000588 Switching jumper, pitch: 8.2 mm, color: gray/orange     12/09/2021   Page 25 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Switching jumper - SB-MER 4-8 - 3000589 Switching jumper, pitch: 8.2 mm, color: gray/orange     Switching lock Switching lock - SL-SB - 3035761 Switching lock, for additional locking of short-circuit switching elements in current transformer measuring circuits, length: 16.3 mm, width: 12.5 mm, height: 13.6 mm, color: white     Terminal marking Zack marker strip - ZB 8:UNBEDRUCKT - 1052002 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 8 - 0818072 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56     Marker for terminal blocks - UCT-TM 8 - 0828740 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 42     12/09/2021   Page 26 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TMF 8 - 0818137 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56     Marker for terminal blocks - UCT-TMF 8 - 0828748 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm, Number of individual labels: 42     Test plug terminal block Test plugs - MPS-MT/ 4MM - 3048577 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Test plugs - PS-8 - 3031005 Test plugs, Modular test plug, color: red     12/09/2021   Page 27 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Test plugs - PS-8/2,3MM RD - 3048564 Test plugs, color: red     Female test connector - PSBJ 6-T GY - 3070316 Female test connector, color: gray     Female test connector - PSBJ 6-T BN - 3070317 Female test connector, color: brown     Female test connector - PSBJ 6-T BK - 3070318 Female test connector, color: black     Female test connector - PSBJ 6-T RD - 3070319 Female test connector, color: red     12/09/2021   Page 28 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Female test connector - PSBJ 6-T OG - 3070320 Female test connector, color: orange     Female test connector - PSBJ 6-T WH - 3070324 Female test connector, color: white     Female test connector - PSBJ 6-T YE - 3070326 Female test connector, color: yellow     Female test connector - PSBJ 6-T GN - 3070327 Female test connector, color: green     Female test connector - PSBJ 6-T VT - 3070328 Female test connector, color: violet     12/09/2021   Page 29 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Female test connector - PSBJ 6-T BU - 3070329 Female test connector, color: blue     Test socket Female test connector - TPS 3/20/5 - 3246586 Female test connector, for 4 mm test plugs, for screwing into the bridge shaft, color: silver     Test adapter - PAI-4-FIX BU - 3032729 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: blue     Test adapter - PAI-4-FIX OG - 3034455 4 mm test adapter, for terminal blocks with 8.2 mm pitch     Test adapter - PAI-4-FIX YE - 3032745 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: yellow     12/09/2021   Page 30 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Test adapter - PAI-4-FIX RD - 3032732 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: red     Test adapter - PAI-4-FIX GN - 3032758 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: green     Test adapter - PAI-4-FIX BK - 3032774 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: black     Test adapter - PAI-4-FIX GY - 3032790 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: gray     Test adapter - PAI-4-FIX VT - 3032761 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: violet     12/09/2021   Page 31 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Test adapter - PAI-4-FIX BN - 3032787 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 8.2 mm pitch, color: brown     Test adapter - PAI-4-FIX WH - 3032797 4 mm test adapter, for terminal blocks with 8.2 mm pitch     Test adapter - PAIS-4-FIX GY - 3032791 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: gray     Test adapter - PAIS-4-FIX BK - 3032792 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: black     Test adapter - PAIS-4-FIX RD - 3032793 Test adapter, Do not plug in while the power is connected, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: red     12/09/2021   Page 32 / 33 https://www.phoenixcontact.com/us/products/1350428 Test disconnect terminal block - PTVME 6/S BU - 1350428 Accessories Test adapter - PAIS-4-FIX BU - 3032798 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: blue     Test adapter - PAIS-4-FIX YE - 3032799 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: yellow     Test adapter - PAIS-4-FIX GN - 3032801 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: green     Test adapter - PAIS-4-FIX VT - 3032802 Test adapter, Touch proof against unintentional direct contact according to DIN EN 50274 when plugged in, for 4 mm test plug and terminal blocks with 5.2 mm, 6.2 mm, and 8.2 mm pitch, color: violet     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 12/09/2021   Page 33 / 33