1401097

https://www.phoenixcontact.com/us/products/1401097 Bus system connector - SACC-M12FSB-5CON-PG9 SH XL PB - 1401097 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Bus system connector, female connector, straight, 5-pos., M12, shielded, gold-plated contacts, B-coded, screw connection, metal knurl, Pg11 cable gland Product Features  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  Reliable signal transmission - 360° shielding in environments with electromagnetic interference       Key commercial data Packing unit 1 PCE GTIN Custom tariff number 85366990 Country of origin GERMANY Technical data Dimensions External diameter 8 mm ... 10 mm Ambient conditions Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 08.10.2013   Page 1 / 4 https://www.phoenixcontact.com/us/products/1401097 Bus system connector - SACC-M12FSB-5CON-PG9 SH XL PB - 1401097 Technical data General Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding B - inverse Signal type/category PROFIBUS Status display No Surge voltage category II Pollution degree 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² AWG conductor cross section 24 ... 18 Insertion/withdrawal cycles ≥ 100 Torque 1 Nm ... 1.4 Nm (Pressure nut) 0.2 Nm (Screw terminal blocks) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Inflammability class according to UL 94 V0 Contact material CuSn Contact surface material Au Contact carrier material PA 66 Material of grip body Zinc die-cast, nickel-plated Material, knurls Nickel-plated brass Sealing material NBR Classifications ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 08.10.2013   Page 2 / 4 https://www.phoenixcontact.com/us/products/1401097 Bus system connector - SACC-M12FSB-5CON-PG9 SH XL PB - 1401097 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST  Drawings Schematic diagram Schematic diagram 3 1 4 5 5 2 4 3 2 Cable connection side M12 (screw connection) 1 Pin assignment M12 socket, 5-pos., B-coded, female side 08.10.2013   Page 3 / 4 https://www.phoenixcontact.com/us/products/1401097 Bus system connector - SACC-M12FSB-5CON-PG9 SH XL PB - 1401097 Dimensioned drawing Ø20,2 57 18 M12 x 1 socket, straight, shielded Functional drawing Assembly steps for M12 male/female plug and conductor a = Slide on parts b= Strip conductor, widen shield and lay around the shielding ring, cut off projecting mesh. Slide cores through the housing. Mount shielding ring, gasket and clamping cage. Tighten pressure screw to fix the cable. Screw down cores. Mount male/female part. Tighten pressure screw. © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 08.10.2013   Page 4 / 4