1402262

https://www.phoenixcontact.com/us/produkte/1402262 Sensor/Actuator cable - SAC-8P- 1,0-285/FS SH SCO - 1402262 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/Actuator cable, 8-position, PUR, Gray RAL 7001, shielded, Free cable end, on Socket straight M12-SPEEDCON, A-coded, Cable length: 1 m, Twisted pair cables as in the figure, but with a gray conductor   Key commercial data Packing unit 0 Minimum order quantity 25 GTIN Custom tariff number 85444290 Country of origin POLAND Technical data General data Rated current at 40°C 2A Rated voltage 30 V Number of positions 8 Volume resistance ≤ 5 mΩ Insulation resistance ≥ 100 MΩ Length of cable 1m Stripping length of the free conductor end 50 mm Ambient temperature (operation) -25 °C ... 90 °C (Male connector / female connector) General characteristics Coding A - standard Surge voltage category II Pollution degree 3 Degree of protection IP65/IP67/IP69K Contact material CuZn Contact surface material Ni/Au Contact carrier material TPU GF Material of grip body TPU, hardly inflammable, self-extinguishing Material, knurls Zinc die-cast, nickel-plated 08.08.2012   Page 1 / 4 https://www.phoenixcontact.com/us/produkte/1402262 Sensor/Actuator cable - SAC-8P- 1,0-285/FS SH SCO - 1402262 Technical data General characteristics Sealing material NBR Status display No Conductor data Cable type PUR, gray, shielded Cable type (abbreviation) 285 Cable abbreviation Li12YC11Y-HF Conductor cross section 4 x 2 x 0.25 mm² (signal line) Conductor cross section 1x 0.25 mm² (Drain wire) AWG signal line 24 Conductor structure signal line 32x 0.10 mm External cable diameter 7.6 mm ± 0.2 mm Wire colors white-brown, green-yellow, gray-pink, blue-red External sheath, color Gray RAL 7001 Insulation resistance ≥ 100 MΩ*km Nominal voltage, conductor 350 V Test voltage, conductor 1200 V Twisted pairs 2 cores to the pair Overall twist 4 pairs for core Shielding Tinned copper braided shield Optical shield covering 85 % Outer sheath, material PUR Material conductor insulation PES Conductor material Bare Cu litz wires Smallest bending radius, movable installation 57 mm Number of bending cycles 3000000 Bending radius 100 mm Traversing path 1.2 m Traversing rate 1.4 m/s Acceleration 2 m/s² Ambient temperature (operation) -50 °C ... 80 °C (cable, fixed installation) Ambient temperature (operation) -40 °C ... 80 °C (cable, flexible installation) Special properties wear-resistant and notch tough Resistance to oil very good oil and chemical resistance Other resistance ozone and UV resistant Classifications eclass eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 08.08.2012   Page 2 / 4 https://www.phoenixcontact.com/us/produkte/1402262 Sensor/Actuator cable - SAC-8P- 1,0-285/FS SH SCO - 1402262 Classifications eclass eCl@ss 6.0 27279218 eCl@ss 7.0 27279218 etim ETIM 3.0 EC001855 ETIM 4.0 EC001855 unspsc UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Drawings Schematic diagram Cable cross section 5 4 6 8 3 2 7 1 Pin assignment M12 socket, 8-pos., A-coded, view female side PUR, gray, shielded [285] Dimensioned drawing Dimensioned drawing M12 x 1 female connector, straight, shielded M12 Ø14,8 Ø12 M12 44,5 Ø14,8 Ø12 44,5 M12 x 1 female connector, straight, shielded 08.08.2012   Page 3 / 4 https://www.phoenixcontact.com/us/produkte/1402262 Sensor/Actuator cable - SAC-8P- 1,0-285/FS SH SCO - 1402262 Circuit diagram 1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD Contact assignment of the M12 socket © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 08.08.2012   Page 4 / 4