1402457

https://www.phoenixcontact.com/us/products/1402457 Flush-type socket - SACC-CI-M12FS-8CON-L180-10G - 1402457 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Cat6A flush-type socket, Ethernet, 8-pos., rear mounting, with straight solder connection Product Features ■ ■ ■ ■ Reduced mounting costs thanks to two-piece device connector Packaging available for automated pick and place assembly All common pin assignments and codings available Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc Weight per Piece (excluding packing) 4.0 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP67 (when plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. 05/04/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1402457 Flush-type socket - SACC-CI-M12FS-8CON-L180-10G - 1402457 Technical data General Rated current at 40°C 0.5 A Rated voltage 50 V AC 60 V DC Rated surge voltage 1.5 kV Number of positions 8 Insulation resistance > 100 MΩ Coding X - data Standards/regulations M12 connector IEC 61076-2-109 Signal type/category Ethernet CAT6A Overvoltage category III Degree of pollution 3 Connection method THR solder connection Insertion/withdrawal cycles > 100 Mounting type PCB mounting Type of packaging Tray Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PPA Material Zinc die-cast (nickel-plated) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-109 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 eCl@ss 8.0 27440103 05/04/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1402457 Flush-type socket - SACC-CI-M12FS-8CON-L180-10G - 1402457 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 0.5 A Nominal voltage UN 60 V 05/04/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1402457 Flush-type socket - SACC-CI-M12FS-8CON-L180-10G - 1402457 Approvals cUL Recognized      Nominal current IN 0.5 A Nominal voltage UN 60 V EAC  EAC  EAC  cULus Recognized  Drawings Schematic diagram 4 Drilling diagram 5 3 5,6 6 2,8 Ø1,3 7 1 4 8 5 6 Pin assignment M12 connector, 8-pos., view socket side 2,8 Ø10 3 2 5,6 2 7 1 8 Ø1,1 Soldering pad geometry 05/04/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1402457 Flush-type socket - SACC-CI-M12FS-8CON-L180-10G - 1402457 Dimensional drawing 21,5 Ø8,3 Ø0,8 19,2 M12 female connector contact carrier Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/04/2016   Page 5 / 5