1403372

https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 5-position, Socket straight M12, Coding: A, Screw connection, knurl material: Stainless steel 1.4404, cable gland Pg11-DUO, external cable diameter 2.1 mm ... 3 mm / 4 mm ... 5.2 mm Your advantages  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  Save space: connect two sensors to one connector with a multiple grommet Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356649391 Weight per Piece (excluding packing) 40.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Diameter housing 20 mm Length 58 mm External cable diameter 2x 2.1 mm ... 3 mm (when using the seal for small outer cable diameters) 2x 4 mm ... 5.2 mm (when using the seal for large outer cable diameters) Stripping length of the sheath 20 mm Stripping length of the individual wire 5 mm 04/21/2020   Page 1 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 4A Rated voltage 48 V AC 60 V DC Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Conductor cross section AWG 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Torque 0.4 Nm (M12 knurl) 0.8 Nm ... 1 Nm 0.2 Nm (Screw terminal blocks) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions This connector includes one seal for small and one seal for large outer cable diameters. Material Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Stainless steel 1.4404 Sealing material NBR Cable 04/21/2020   Page 2 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Technical data Cable Standards/specifications M12 connector IEC 61076-2-101 Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing M12 x 1 socket, straight 04/21/2020   Page 3 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Schematic diagram Cable connection side M12 (screw connection) 04/21/2020   Page 4 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Schematic diagram Pin assignment M12 socket, 5-pos., A-coded, socket side view Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 04/21/2020   Page 5 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002061 ETIM 5.0 EC002635 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Accessories Accessories Cable end sleeve Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     04/21/2020   Page 6 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Accessories Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Adapter - SAC BIT M12-W14 - 1212513 Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a hexagonal knurl wrench size of 14 mm, with 4 mm hexagonal drive     Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     04/21/2020   Page 7 / 8 https://www.phoenixcontact.com/us/products/1403372 Connector - SACC-M12FS-5CON-PG11-DUO VA - 1403372 Accessories Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 04/21/2020   Page 8 / 8