https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator cable, 5-position, PP-EPDM halogen-free, gray RAL 7035, Plug straight M12, A-coded, on free
cable end, cable length: 5 m, Hygienic design, with high-grade steel knurl
Your advantages
Easy and safe: 100% electrically tested plug-in components
Easy to clean, thanks to the special hygienic design
Corrosion protection for all exposed metal parts, thanks to the use of stainless steel type 1.4404
Contamination can be detected quickly – thanks to the light color
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356677813
Weight per Piece (excluding packing)
180.000 g
Custom tariff number
85444290
Country of origin
Poland
Technical data
Dimensions
Length of cable
5m
Ambient conditions
Ambient temperature (operation)
-40 °C ... 105 °C (Plug / socket)
Degree of protection
IP65
IP67
01/17/2020 Page 1 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Technical data
Ambient conditions
IP68
IP69K
General
Rated current at 40°C
4A
Rated voltage
48 V AC
60 V DC
Number of positions
5
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Material conformance FDA 21 CFR 177.2600
Status display
No
Protective circuit/component
unwired
Overvoltage category
II
Degree of pollution
3
Insertion/withdrawal cycles
≥ 100
Torque
0.4 Nm (M12 connector)
Material
Contact material
CuSn
Contact surface material
Ni/Au
Contact carrier material
PP
Material of grip body
PP
Material, knurls
Stainless steel
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Standard designation
Material conformance
Standards/regulations
FDA 21 CFR 177.2600
Cable
Cable type
Halogen-free PP gray
Cable type (abbreviation)
600
Cable abbreviation
Li9Y9Y
Conductor cross section
5x 0.34 mm² (Signal line)
AWG signal line
22
Conductor structure signal line
42x 0.10 mm
01/17/2020 Page 2 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Technical data
Cable
Core diameter including insulation
1.27 mm ±0.02 mm (Signal line)
Thickness, insulation
≥ 0.21 mm (Core insulation)
Wire colors
Brown, white, blue, black, gray
Overall twist
5 cores, twisted
Length of twist, overall twist
55 mm
External sheath, color
gray RAL 7035
Outer sheath thickness
approx. 0.7 mm
External cable diameter D
5 mm ±0.15 mm
Minimum bending radius, fixed installation
5xD
Minimum bending radius, flexible installation
10 x D
Number of bending cycles
4000000
Minimum bending radius, drag chain applications
10 x D
Traversing path
10 m
Traversing rate
3 m/s
Acceleration
10 m/s²
Torsion force
± 270 °/m (4,000,000 torsion cycles, max. 25 torsion cycles/min)
Cable weight
34 kg/km
Outer sheath, material
PP-EPDM
Material conductor insulation
PP
Conductor material
Bare Cu litz wires
Conductor resistance
58 Ω/km (at 20 °C)
Nominal voltage, cable
≤ 300 V AC
Test voltage, cable
≥ 3000 V AC
Special properties
FDA compliant according to FDA 21 CFR 177.2600
highly flexible
Flexible cable conduit capable
Halogen-free
in accordance with DIN VDE 0472 part 815
Other resistance
Resistant to cold bending and cold impacts According to DIN EN
60811-1-4 (-40 °C)
Ambient temperature (operation)
-40 °C ... 105 °C (cable, fixed installation)
-25 °C ... 105 °C (cable, flexible installation)
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
01/17/2020 Page 3 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Dimensional drawing
Plug, M12 x 1, straight, shielded
Circuit diagram
Contact assignment of the M12 plug
01/17/2020 Page 4 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Schematic diagram
Pin assignment M12 male connector, 5-pos., A-coded, male side
01/17/2020 Page 5 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Cable cross section
Halogen-free PP gray [600]
Classifications
eCl@ss
eCl@ss 4.0
27060300
eCl@ss 4.1
27060300
eCl@ss 5.0
27061800
eCl@ss 5.1
27061800
eCl@ss 6.0
27279200
eCl@ss 7.0
27279218
eCl@ss 8.0
27279218
01/17/2020 Page 6 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Classifications
eCl@ss
eCl@ss 9.0
27060311
ETIM
ETIM 3.0
EC001855
ETIM 4.0
EC001855
ETIM 5.0
EC001855
ETIM 6.0
EC001855
ETIM 7.0
EC001855
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
31251501
UNSPSC 19.0
31251501
UNSPSC 20.0
31251501
UNSPSC 21.0
31251501
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
RU CDE.BL08.B.00286
Accessories
Accessories
Cutting tools
01/17/2020 Page 7 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Accessories
Diagonal cutter - CUTFOX-S VDE - 1212207
Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
Screwdriver tools
Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Adapter - SAC BIT M12-W14 - 1212513
Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a hexagonal knurl
wrench size of 14 mm, with 4 mm hexagonal drive
Stripping tool
Stripping tool - WIREFOX SAC - 1212623
Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7
mm, any stripping length
Stripping tool - WIREFOX 10 - 1212150
Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting
capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
01/17/2020 Page 8 / 9
https://www.phoenixcontact.com/us/products/1404042
Sensor/actuator cable - SAC-5P-M12MS/5,0-600 HD - 1404042
Accessories
Torque tool
Torque screwdriver - TSD 04 SAC - 1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver - TSD-M 1,2NM - 1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
01/17/2020 Page 9 / 9
