1404417

https://www.phoenixcontact.com/gb/products/1404417 Power connectors - SACC-M12MS-5CON-PG11-M PWR - 1404417 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power connectors, 5-position, Plug straight M12, A-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, Cable gland Pg11, External cable diameter 8 mm ... 10 mm Why buy this product  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356694490 Weight per Piece (excluding packing) 26.400 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 8 mm ... 10 mm Ambient conditions Degree of protection IP67 General Note Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. Rated current at 40°C 8 A (Contact 5: 2 A) when using 1.5 mm² conductors 12/21/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1404417 Power connectors - SACC-M12MS-5CON-PG11-M PWR - 1404417 Technical data General Rated voltage 125 V Number of positions 5 Insulation resistance > 10 GΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 1.5 mm² Conductor cross section AWG 16 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 1 Nm ... 1.4 Nm (Pressure screw with sleeve housing) 0.4 Nm (Screw plug insert with sleeve housing as far it will go) 0.2 Nm (Screw terminal blocks) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material NBR (Cable clamping) Cable Standards/specifications M12 connector IEC 61076-2-101 Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 12/21/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1404417 Power connectors - SACC-M12MS-5CON-PG11-M PWR - 1404417 Schematic diagram 4 Dimensional drawing 3 65,5 1 2 Ø20 M12x1 5 Pin assignment M12 male connector, 5-pos., Acoded, male side 18 19 Plug, M12 x 1, straight, shielded Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / EAC Ex Approvals 12/21/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1404417 Power connectors - SACC-M12MS-5CON-PG11-M PWR - 1404417 Approvals Approval details EAC      7500651.22.01.00246 EAC      EAC-Zulassung Accessories Accessories Connector Ferrule - A 1,5 - 7 - 3200263 Ferrule, Length: 7 mm, Color: silver     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 sockets     Screwdriver tools 12/21/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1404417 Power connectors - SACC-M12MS-5CON-PG11-M PWR - 1404417 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Stripping tool Stripping tool - WIREFOX 6SC - 1212158 Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/21/2016   Page 5 / 5