1404641

https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power connectors, 4-position, Plug straight M12, S-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, Cable gland Pg11, External cable diameter 8 mm ... 10 mm, for AC current up to 12 A/630 V, Contact 4 leading Why buy this product  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  High-performance: AC connectors for up to 12 A and 630 V AC  Protection against incorrect connection using special S-coding Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356707725 Weight per Piece (excluding packing) 20.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Wrench size, union nut 19 mm External cable diameter 8 mm ... 10 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) 01/26/2017   Page 1 / 7 https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Technical data Ambient conditions Degree of protection IP67 General Note Strip 21 mm off the cable sheath, strip 6 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Conductor length with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. Rated current at 40°C 12 A (when using 1.5 mm² conductors) 12 A (at 40 °C) Rated voltage 630 V AC Number of positions 4 Insulation resistance > 10 GΩ Coding S power Standards/regulations IEC 61076-2-111 Status display No Overvoltage category III Degree of pollution 3 Connection method Screw connection Conductor cross section 0.75 mm² ... 1.5 mm² Conductor cross section AWG 18 ... 16 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 1 Nm ... 1.4 Nm (Pressure screw with sleeve housing) 0.4 Nm (Screw plug insert with sleeve housing as far it will go) 0.2 Nm (Screw terminal blocks) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material NBR (Cable clamping) Cable Standards/specifications IEC 61076-2-111 Standards and Regulations 01/26/2017   Page 2 / 7 https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Technical data Standards and Regulations Standards/regulations IEC 61076-2-111 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Schematic diagram Dimensional drawing 65,5 3 1 2 Ø20 M12x1 5 Connector pin assignment of M12 plug, 4-pos., Scoded, view of pin side 18 19 Plug, M12 x 1, straight, shielded Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 01/26/2017   Page 3 / 7 https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Classifications UNSPSC UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 16 Nominal current IN 12 A Nominal voltage UN 600 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 16 Nominal current IN 12 A Nominal voltage UN 600 V EAC      FILE E 221474  FILE E 221474  EAC-Zulassung 01/26/2017   Page 4 / 7 https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Approvals EAC      7500651.22.01.00246 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Connector Ferrule - AI 1,5 - 6 BK - 3200755 Ferrule, Sleeve length: 6 mm, Length: 12 mm, Color: black     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 sockets     Screwdriver tools 01/26/2017   Page 5 / 7 https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Stripping tool Stripping tool - WIREFOX 6SC - 1212158 Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     01/26/2017   Page 6 / 7 https://www.phoenixcontact.com/us/products/1404641 Power connectors - SACC-M12MSS-3PECON-PG11-M - 1404641 Accessories Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/26/2017   Page 7 / 7