1404643

https://www.phoenixcontact.com/us/products/1404643 Connector - SACC-M12MST-3PECON-PG11-M - 1404643 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 4-position, Plug straight M12, T-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, Cable gland Pg11, External cable diameter 8 mm ... 10 mm, for direct current up to 12 A/60 V, Contact 4 leading Product Features ■ ■ ■ ■ ■ Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Screw connection: proven connection technology for a large selection of different conductors High-performance: DC connectors for up to 12 A and 60 V DC Protection against incorrect connection using special T-coding Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 20.0 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 8 mm ... 10 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. Rated current at 40°C 12 A (When using 1.5 mm² conductors) 05/04/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1404643 Connector - SACC-M12MST-3PECON-PG11-M - 1404643 Technical data General Rated voltage 63 V DC Number of positions 4 Insulation resistance > 10 GΩ Coding T power Standards/regulations IEC 61076-2-111 Status display No Overvoltage category III Degree of pollution 3 Connection method Screw connection Conductor cross section 0.75 mm² ... 1.5 mm² Conductor cross section AWG 18 ... 16 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 1 Nm ... 1.4 Nm (Pressure nut with coupling sleeve) Screw plug insert with sleeve housing as far it will go 0.2 Nm (Screw terminal blocks) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material NBR (Cable clamping) Standards and Regulations Standards/regulations IEC 61076-2-111 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 05/04/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1404643 Connector - SACC-M12MST-3PECON-PG11-M - 1404643 Classifications eCl@ss eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC Ex Approvals Approvals submitted Approval details UL Recognized  05/04/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1404643 Connector - SACC-M12MST-3PECON-PG11-M - 1404643 Approvals cUL Recognized  EAC  EAC  Drawings Schematic diagram Dimensional drawing 65,5 1 3 Ø20 M12x1 4 2 Connector pin assignment of M12 plug, 4-pos., Tcoded, view of pin side 18 19 M12 x 1 plug, straight Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/04/2016   Page 4 / 4