1404741

SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, Ethernet CAT6 A (10 Gbps), 8-position, Socket, straightSPEEDCON, coding: X, Rear mounting, M12 x 1, Wave soldering, Alternative product in accordance with RoHS II without Exemption 6c (Pb IP54. Influences arising from litz wires, cables, or PCB mounting must also be taken into consideration. Additional mechanical fixing of the PCB is required. Order information: Lock nut is included in the scope of delivery Mounting Mounting type Rear mounting M12 x 1 Product properties Product type Circular connectors (device side) Application Data Sensor type Ethernet Number of positions 8 Shielded yes Coding X Thread type M12 Data management status Article revision 08 Insulation characteristics Overvoltage category III Degree of pollution 3 Dimensions Length of the solder pin 6 mm 6 mm Material specifications Material Zinc die-cast (nickel-plated) Flammability rating according to UL 94 V0 Seal material FKM Material of grip body Zinc die-cast, nickel-plated Contact material CuZn Contact surface material gold-plated Contact carrier material PPA Material for screw connection Zinc die-cast, nickel-plated Oct 15, 2024, 12:39 AM Page 2 (8) SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Electrical properties Rated surge voltage 0.8 kV Contact resistance ≤ 3 mΩ Insulation resistance > 100 MΩ Nominal voltage UN 50 V AC 60 V DC Nominal current IN 0.5 A (Data) Transmission characteristics (category) CAT6A Connection data Conductor connection Connection method Wave soldering Contact connection type Socket Tightening torque 2 Nm ... 3 Nm Mechanical properties Mechanical data Insertion/withdrawal cycles ≥ 100 Connector Connection 1 Head design Socket Head cable outlet straight Head locking type SPEEDCON Coding X Cable/line Signal type/category Ethernet CAT6A, 10 Gbps Environmental and real-life conditions Ambient conditions Degree of protection IP67 (When plugged in) IP67 Ambient temperature (operation) -40 °C ... 85 °C Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-109 Standard designation Shock, vibration Oct 15, 2024, 12:39 AM Page 3 (8) SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Standards/specifications EN 50155 Oct 15, 2024, 12:39 AM Page 4 (8) SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Drawings 3 2 4 1 Schematic diagram 5 8 6 7 M12 socket pin assignment, 8-pos, view of socket side Oct 15, 2024, 12:39 AM Page 5 (8) SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1404741   cUL Recognized Approval ID: E335024-20120308 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 60 V 0.5 A - - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 60 V 0.5 A - - UL Recognized Approval ID: E335024-20120308 cULus Recognized Oct 15, 2024, 12:39 AM Page 6 (8) SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Oct 15, 2024, 12:39 AM Page 7 (8) SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting 1404741 https://www.phoenixcontact.com/us/products/1404741 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP b720dd2e-e3ac-46c1-b1fd-36d4e51c5d3c Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 15, 2024, 12:39 AM Page 8 (8)