1404800

https://www.phoenixcontact.com/us/produkte/1404800 Sensor/Actuator cable - SAC-3P- 10,0-PVC/BI B-L - 1404800 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/Actuator cable, 3-position, PVC, Black RAL 9005, Free cable end, on BI valve plug (11 mm), Cable length: 10 m   Key commercial data Packing unit 0 Minimum order quantity 1 GTIN Custom tariff number 85444290 Country of origin POLAND Technical data General data Rated current at 40°C 6A Rated voltage 230 V Number of positions 3 Volume resistance ≤ 5 mΩ Insulation resistance ≥ 100 MΩ Length of cable 10 m Ambient temperature (operation) -20 °C ... 85 °C (valve plug) General characteristics Surge voltage category III Pollution degree 3 Degree of protection IP65/67 Torque 0.6 Nm (Valve plug-in connector) Valve plug contact material CuSn Valve plug contact surface material Sn Valve plug contact insert material PA 66 Material housing valve plug TPU Sealing material TPU (Seal molded) Status display No 18.01.2013   Page 1 / 7 https://www.phoenixcontact.com/us/produkte/1404800 Sensor/Actuator cable - SAC-3P- 10,0-PVC/BI B-L - 1404800 Technical data General characteristics Protective circuit/component Unwired Conductor data Cable type PVC black Cable type (abbreviation) PVC Cable abbreviation LiYY Conductor cross section 3x 0.5 mm² AWG signal line 20 Conductor structure signal line 16x 0.20 mm Core diameter including insulation 1.5 mm ±0.05 mm Wire colors Black 1, black 2, green/yellow Overall twist 3 wires, twisted External sheath, color Black RAL 9005 External cable diameter D 4.8 mm ± 0.2 mm Smallest bending radius, fixed installation 24 mm Smallest bending radius, movable installation 48 mm Outer sheath, material PVC Material conductor insulation PVC Conductor material Bare Cu litz wires Insulation resistance Min. 20 MΩ*km Conductor resistance 39 Ω/km (at 20 °C) Nominal voltage, conductor 300 V Test voltage, conductor 1200 V Flame resistance DIN EN 50265-2-1 Resistance to oil Almost oil-resistant Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) Ambient temperature (operation) -5 °C ... 80 °C (cable, flexible installation) Classifications ETIM ETIM 3.0 EC001855 ETIM 4.0 EC001855 ETIM 5.0 EC001855 UNSPSC UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 18.01.2013   Page 2 / 7 https://www.phoenixcontact.com/us/produkte/1404800 Sensor/Actuator cable - SAC-3P- 10,0-PVC/BI B-L - 1404800 Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 Accessories Accessories Assembly Screw - SAC-V-SCREW-M3-29 KNURL - 1403779 Fillister head screw with plastic knurl, M3 x 40     Marking Insert label - PABA WH/15 - 1013151 Insert label, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Thread on, Cable diameter: 0.6-50 mm, Lettering field: 15 x 4 mm     Insert label - PABA YE/15 - 1013698 Insert label, yellow, Unlabeled, Can be labeled with: Plotter, Mounting type: Thread on, Cable diameter: 0.6-50 mm, Lettering field: 15 x 4 mm     Insert label - PABA RD/15 - 1013944 Insert label, red, Unlabeled, Can be labeled with: Plotter, Mounting type: Thread on, Cable diameter: 0.6-50 mm, Lettering field: 15 x 4 mm     18.01.2013   Page 3 / 7 https://www.phoenixcontact.com/us/produkte/1404800 Sensor/Actuator cable - SAC-3P- 10,0-PVC/BI B-L - 1404800 Accessories Conductor marker carrier - PATG 2/23 - 1013850 Conductor marker carrier, transparent, Unlabeled, Mounting type: Slide on, Cable diameter: 2-4 mm, Lettering field: 4 x 23 mm     Conductor marker carrier - PATG 3/23 - 1013863 Conductor marker carrier, transparent, Unlabeled, Mounting type: Slide on, Cable diameter: 4-7 mm, Lettering field: 4 x 23 mm     Conductor marker carrier - PATG 4/23 - 0808011 Conductor marker carrier, transparent, Unlabeled, Mounting type: Slide on, Cable diameter: 6-10 mm, Lettering field: 4 x 23 mm     Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Tools Cable-cutting tool - CUTFOX-S VDE - 1212207 Diagonal cutter for copper and aluminum conductors, VDE-tested     18.01.2013   Page 4 / 7 https://www.phoenixcontact.com/us/produkte/1404800 Sensor/Actuator cable - SAC-3P- 10,0-PVC/BI B-L - 1404800 Accessories Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length     Stripping tool - WIREFOX 10 - 1212150 Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Drawings Schematic diagram Cable cross section 1 2 Valve connector pin assignment, type BI PVC black [PVC] 45 9,9 28 Dimensioned drawing 28,2 Dimensioned drawing 11 20,5 1 2 Valve connector, type BI, side view Valve connector, type BI 18.01.2013   Page 5 / 7 https://www.phoenixcontact.com/us/produkte/1404800 Sensor/Actuator cable - SAC-3P- 10,0-PVC/BI B-L - 1404800 Circuit diagram BK 2 BK 1 GNYE (PE) 2 1 PE Contact assignment of the valve plug 18.01.2013   Page 6 / 7 https://www.phoenixcontact.com/us/produkte/1404800 © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 18.01.2013   Page 7 / 7