1405195

https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AC charging cable, AC charging cable with Vehicle Connector, open cable end, with protective cap, Design line 1, Type 2, IEC 62196-2, 20 A / 250 V (AC), design line D-Line, cable: 4 m, black, spiraled, mating face: gray, handle area: gray Product Description AC charging cable with Vehicle Connector and open cable end for charging electric vehicles (EV) with alternating current (AC) via type 2 Vehicle Inlets, for installation at charging stations for E-Mobility (EVSE) Your advantages  Consistent design of all Phoenix Contact Vehicle Connectors and Infrastructure Plugs  Silver-plated surface of the power and signal contacts  Certified in accordance with IATF 16949:2016 and ISO 9001:2015  Convenient handling, thanks to the ergonomic handle and additional, rubber grip components Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356737067 Weight per Piece (excluding packing) 0.010 g Custom tariff number 85444290 Country of origin Germany Technical data Product definition Product type AC charging cable with Vehicle Connector, open cable end, with protective cap Type D-Line Standards/regulations IEC 62196-2 01/05/2020   Page 1 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Technical data Product definition Charging standard Type 2 Charging mode Mode 3, Case C Dimensions Vehicle connector width 60.00 mm Vehicle connector height 102.90 mm Vehicle connector depth 229.60 mm Conductor length 4m Stripping length 45 mm ±10 mm Ambient conditions Ambient temperature (operation) -30 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Max. altitude 5000 m (above sea level) Degree of protection IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) IP44 (Protective cap) Electrical properties Maximum charging power 5 kW Number of phases 1 Number of power contacts 3 (L1, N, PE) Rated current of power contacts 20 A Rated voltage for power contacts 250 V AC Number of signal contacts 2 (CP, PP) Rated current for signal contacts 2A Rated voltage for signal contacts 30 V AC Type of signal transmission Pulse width modulation Note on the connection method Crimp connection, cannot be disconnected Resistor coding 680 Ω (between PE and PP) Mechanical properties Insertion/withdrawal cycles > 10000 Insertion force < 100 N Withdrawal force < 100 N Design Design line D-Line Housing color black Mating face color gray 01/05/2020   Page 2 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Technical data Design Color handle area gray Color protective cap black Label 14.1 mm x 44.8 mm (customer logo on request) Material Housing material Plastic Material handle area Soft plastic Material protective cap Soft plastic Material mating face Plastic Material surface of contacts Ag Cable Cable structure 3 x 2.5 mm² + 1 x 0.5 mm² Wiring standards/regulations prEN 50620 / DIN EN 50620 Wiring class Class 5 Wiring certifications VDE External cable diameter 10.2 mm ±0,3 mm Type of conductor spiraled Cable resistance ≤ 0.00798 Ω/m (based on a power core, at an ambient temperature of 20°C) Outer sheath, material TPE-U External sheath, color black Minimum bending radius 153 mm (15 x diameter) Coil diameter 45 mm ±10 % Block length 0.68 m ±10 % Effective length max. 4 m ±5 % Locking Locking type No locking option for U-lock Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 10; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 01/05/2020   Page 3 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Schematic diagram Pin assignment of the Vehicle Connector 01/05/2020   Page 4 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Schematic diagram 01/05/2020   Page 5 / 9 Operating instructions https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Dimensional drawing Ensure that the vehicle connector is placed in an appropriate resting position that ensures a minimum protection rating of IP24 in accordance with IEC 61851-1 for the entire time between charging. Use the dimensions of the vehicle connector to create this type of resting position. Detailed specifications can also be found in the download area. Classifications eCl@ss eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27143400 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 eCl@ss 9.0 27144705 ETIM ETIM 3.0 EC002061 01/05/2020   Page 6 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Classifications ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002839 ETIM 6.0 EC002897 ETIM 7.0 EC002897 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 UNSPSC 18.0 39121522 UNSPSC 19.0 39121522 UNSPSC 20.0 39121522 UNSPSC 21.0 39121522 Approvals Approvals Approvals VDE Zeichengenehmigung / IECEE CB Scheme Ex Approvals Approval details VDE Zeichengenehmigung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 250 V Nominal current IN 20 A mm²/AWG/kcmil 2.5  40037319 01/05/2020   Page 7 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Approvals IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 250 V Nominal current IN 20 A  DE1-61387 Accessories Accessories AC charging controller AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 The EV-CC-AC1-M3-CBC-SER-HS charging controller with housing for DIN rail mounting is used for charging electric vehicles at 3-phase AC networks according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated.     AC charging controller - EV-CC-AC1-M3-CC-SER-PCB - 1622460 The EV-CC-AC1-M3-CC-SER-PCB charging controller as a PCB for charging electric vehicles on a 3-phase AC power grid according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated.     AC charging controller - EV-CC-AC1-M3-CC-SER-PCB-XC-25X - 1627742 The EV-CC-AC1-M3-CC-SER-PCB charging controller as a PCB for charging electric vehicles on a 3-phase AC power grid according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated.     01/05/2020   Page 8 / 9 https://www.phoenixcontact.com/us/products/1405195 AC charging cable - EV-T2M3C-1AC20A-4,0M2,5EHBK00 - 1405195 Accessories AC charging controller - EV-CC-AC1-M3-CC-SER-PCB-MSTB - 1627367 The EV-CC-AC1-M3-CC-SER-PCB-MSTB charging controller as a PCB for charging electric vehicles according to IEC 61851-1, Mode 3, optimized for charging stations with permanently mounted Vehicle Connector. Connection via PCB connector on header.     AC charging controller - EM-CP-PP-ETH - 2902802 EV charge control is used to charge electrical vehicles on the 3-phase AC mains power supply according to IEC 61851-1 Mode 3. All necessary control functions are integrated. Additional functions are available for various charging applications.     Park position Park position - EV-T2AC-PARK - 1624148 Retainer for Vehicle Connector as parking position at charging stations (EVSE), Type 2, IEC 62196-2, Front mounting     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 01/05/2020   Page 9 / 9