1405240

https://www.phoenixcontact.com/us/products/1405240 Flush-type connector - SACC-DSI-M12FS-4CON-PG9/0,5 VA - 1405240 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 4-pos., stainless steel design, rear/screw mounting with Pg9 thread, with 0.5 m TPE litz wire, 4 x 0.34 mm² Why buy this product  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  Standard pin assignments and codings for signal transmission with a uniform design-in design  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356746762 Weight per Piece (excluding packing) 20.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) 12/01/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1405240 Flush-type connector - SACC-DSI-M12FS-4CON-PG9/0,5 VA - 1405240 Technical data Ambient conditions Degree of protection IP67 IP69K General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category III Degree of pollution 3 Test voltage 2.5 kV Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Stainless steel Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm 12/01/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1405240 Flush-type connector - SACC-DSI-M12FS-4CON-PG9/0,5 VA - 1405240 Technical data Cable Wire colors Black, brown, blue, white Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing Ø15,3 +0,1 max.4,5 13,5 +0,1 1x45° Schematic diagram 3 4 2 1 Pin assignment M12 socket, 4-pos., A-coded, view female side Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) 12/01/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1405240 Flush-type connector - SACC-DSI-M12FS-4CON-PG9/0,5 VA - 1405240 Dimensional drawing Circuit diagram 19,6 2 500 17 PG9 18 9,5 1 BN 2 WH 4 BK 3 BU !4,5 M12 flush-type socket Contact assignment of the M12 socket Approvals Approvals Approvals UL Recognized / cULus Recognized / EAC Ex Approvals Approval details UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976     mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V cULus Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616     mm²/AWG/kcmil 22-20 Nominal current IN 4A Nominal voltage UN 250 V EAC   B.00767 12/01/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1405240 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/01/2016   Page 5 / 5