1405961

https://www.phoenixcontact.com/us/products/1405961 Sensor/Actuator cable - SAC-8P-M12MS/30-28X/M12FSSHOD - 1405961 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/Actuator cable, 8-position, PE-X/PE-X halogen-free, black-gray RAL 7021, shielded, Plug straight M12, Acoded, on Socket straight M12, A-coded, Cable length: 30 m, for outdoor applications, with high-grade steel knurl Key Commercial Data Packing unit 1 STK Minimum order quantity 25 STK Custom tariff number 85444290 Country of origin Poland Technical data Dimensions Length of cable 30 m Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (Plug / socket) -40 °C ... 85 °C (On sudden changes in temperature (according to IEC 60512-11-4)) Degree of protection IP65 IP67 IP68 IP69K General Rated current at 40°C 2A Rated voltage 30 V Number of positions 8 08/01/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/1405961 Sensor/Actuator cable - SAC-8P-M12MS/30-28X/M12FSSHOD - 1405961 Technical data General Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Protective circuit/component Unwired Degree of pollution 3 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 connector) Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material PP Material of grip body PP Material, knurls Stainless steel Sealing material FPM Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Cable Cable type PE-X black Cable type (abbreviation) 28X Cable abbreviation Li2X2X-C-V1-2X Conductor cross section 8x 0.25 mm² AWG signal line 24 Conductor structure signal line 32x 0.10 mm Core diameter including insulation 1.17 mm ±0.02 mm Thickness, insulation approx. 0.25 mm (Core insulation) Wire colors white, brown, green, yellow, gray, pink, blue, red Overall twist 8 wires around filler to the core Length of twist, overall twist 67 mm Shielding Braided copper wires Optical shield covering 85 % External sheath, color black-gray RAL 7021 Inner sheath thickness approx. 0.5 mm 08/01/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/1405961 Sensor/Actuator cable - SAC-8P-M12MS/30-28X/M12FSSHOD - 1405961 Technical data Cable Outer sheath thickness approx. 0.7 mm External cable diameter D 7.25 mm ±0,3 mm Minimum bending radius, fixed installation 5xD Minimum bending radius, flexible installation 10 x D Number of bending cycles 1000000 Minimum bending radius, drag chain applications 10 x D Traversing path 10 m Traversing rate 3 m/s Acceleration 10 m/s² Cable weight 81 kg/km Outer sheath, material PE-X Material, inner sheath PE-X Material, filler PP yarn Material conductor insulation PE-X Conductor material Bare Cu litz wires Insulation resistance ≥ 100 MΩ*km (at 20 °C) Conductor resistance ≤ 78 Ω/km (at 20 °C) Working capacitance approx. 80 pF (core-core) approx. 125 pF (core-shield) Nominal voltage, cable ≤ 300 V AC Test voltage, cable ≥ 3000 V AC (Spark test) Test voltage Core/Shield ≥ 1000 V AC (for 10 s) Special properties Inductance approx. 0.48 mH/km Flame resistance According to DIN EN 60332-1-2 According to DIN EN 50266-2-5 Halogen-free in accordance with DIN VDE 0472 part 815 in accordance with DIN EN 50267-2-1 Resistance to oil According to DIN EN 60811-2-1, 168 h at 100°C According to DIN EN 50306 Other resistance Resistance to fuels according to IEC 60811, 168 h at 70°C UV resistant According to DIN VDE 0276-605 Ambient temperature (operation) -40 °C ... 105 °C (cable, fixed installation) -15 °C ... 105 °C (cable, flexible installation) 20 °C ±5°C (cable, drag chain applications) Drawings 08/01/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/1405961 Sensor/Actuator cable - SAC-8P-M12MS/30-28X/M12FSSHOD - 1405961 Schematic diagram Schematic diagram Pin assignment M12 plug, 8-pos., A-coded, view plug side Pin assignment M12 socket, 8-pos., A-coded, view female side Cable cross section Dimensional drawing Ø16 46,8 14 M12 x 1 plug, straight PE-X black [28X] Dimensional drawing Circuit diagram Ø16 44 14 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 M12 x 1 socket, straight Contact assignment of the M12 connector and the M12 socket Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 eCl@ss 8.0 27279218 eCl@ss 9.0 27060311 08/01/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/1405961 Sensor/Actuator cable - SAC-8P-M12MS/30-28X/M12FSSHOD - 1405961 Classifications ETIM ETIM 3.0 EC001855 ETIM 4.0 EC001855 ETIM 5.0 EC001855 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals GL Ex Approvals Approvals submitted Approval details GL  Accessories Accessories Screwdriver tools 08/01/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/1405961 Sensor/Actuator cable - SAC-8P-M12MS/30-28X/M12FSSHOD - 1405961 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Adapter - SAC BIT M12-W14 - 1212513 Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a hexagonal knurl wrench size of 14 mm, with 4 mm hexagonal drive     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/01/2016   Page 6 / 6