1406085

https://www.phoenixcontact.com/us/products/1406085 Network cable - VS-M12FSBP-IP20-93E-LI/2,0 - 1406085 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Assembled Ethernet cable, CAT5e, shielded, 2-pair, 26 AWG stranded (7-wire), RAL 5021 (water blue), M12 flush-type socket, rear/screw mounting with SPEEDCON to RJ45 male connector/IP20, line, length 2 m   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 140.0 g Custom tariff number 85444210 Country of origin Poland Technical data Dimensions Length of cable 2m General data Number of positions 4 Signal type/category Ethernet CAT5 (IEC 11801:2002), 100 Mbps Characteristics head 1 Head type Flush-type socket straight M12 SPEEDCON No. of positions (pin connector pattern) 4 Characteristics head 2 Head type Plug straight RJ45 / IP20 No. of positions (pin connector pattern) 4 Cable Cable type PUR ETHERNET 2x2 FLEX Cable type (abbreviation) 93E UL AWM style 20963 (80°C/30 V) 08/20/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1406085 Network cable - VS-M12FSBP-IP20-93E-LI/2,0 - 1406085 Technical data Cable Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps Cable structure 2x2xAWG26/7; SF/UTP Conductor cross section 2x 2x 0.14 mm² AWG signal line 26 Conductor structure signal line 7x 0.16 mm Core diameter including insulation 0.98 mm Wire colors white/orange-orange, white/green-green Twisted pairs 2 cores to the pair Overall twist Two pairs with two fillers to the core Shielding Aluminum-coated foil, tinned copper braided shield Optical shield covering 70 % External sheath, color water blue RAL 5021 Outer sheath thickness 1.2 mm External cable diameter D 6.4 mm ±0.2 mm Minimum bending radius, fixed installation 4xD Minimum bending radius, flexible installation 8xD Tensile strength short-term/long-term ≤ 80N Cable weight 42 kg/km Outer sheath, material PUR Material conductor insulation Foamed PE Conductor material Bare Cu litz wires Insulation resistance ≥ 500 MΩ*km Conductor resistance ≤ 290 Ω/km Cable capacity approx. 45 nF/km (At 1 kHz) Wave impedance 100 Ω ±5 Ω (at 100 MHz) Signal runtime 5.3 ns/m Coupling resistance ≤ 100.00 mΩ/m (At 10 MHz) Nominal voltage, cable ≤ 100 V Test voltage Core/Core 700 V (50 Hz, 1 min.) Test voltage Core/Shield 700 V (50 Hz, 1 min.) Flame resistance According to IEC 60332-1-2 Halogen-free According to IEC 60754-1 Resistance to oil in accordance with DIN EN 60811-2-1 Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -20 °C ... 80 °C (cable, flexible installation) Ambient temperature (installation) -20 °C ... 80 °C 08/20/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1406085 Network cable - VS-M12FSBP-IP20-93E-LI/2,0 - 1406085 Technical data Cable Ambient temperature (storage/transport) -20 °C ... 80 °C Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27060307 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 eCl@ss 8.0 27060308 ETIM ETIM 3.0 EC000830 ETIM 4.0 EC002599 ETIM 5.0 EC002599 UNSPSC UNSPSC 6.01 26121616 UNSPSC 7.0901 26121616 UNSPSC 11 26121604 UNSPSC 12.01 31261501 UNSPSC 13.2 26121616 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted 08/20/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1406085 Network cable - VS-M12FSBP-IP20-93E-LI/2,0 - 1406085 Approvals Approval details EAC  Drawings Dimensional drawing Cable cross section Ø15,9⁺⁰¹ !4,5 13,5⁺⁰¹ Housing cutout for M16 fastening thread, mounting panel with feed-through PUR ETHERNET 2x2 FLEX [93E] hole (alternatively with surface as protection against rotation) Dimensional drawing Dimensional drawing 38,1 30,5 17 19 M12 1,5 M16x1,5 20,5 44,65 13,4 2,8 M12 flush-type connector Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 08/20/2015   Page 4 / 4