1406411

SACC-CI-M12FST-4CON-L180 THR - Contact carrier 1406411 https://www.phoenixcontact.com/us/products/1406411 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Contact carrier, Power, 4-position, Socket, straight, M12, coding: T, PCB mounting, THR solder connection, Alternative product in accordance with RoHS II without Exemption 6c (Pb IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Product properties Product type Contact insert Application Power Sensor type Power Number of positions 4 Seal present no Shielded no Coding T Thread type M12 Data management status Article revision 00 Insulation characteristics Overvoltage category III Degree of pollution 3 Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 63 V Nominal current IN 12 A Connection data Connection method THR solder connection Interfaces Signal type/category Power Material specifications Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 4T Nov 6, 2024, 9:28 AM Page 2 (7) SACC-CI-M12FST-4CON-L180 THR - Contact carrier 1406411 https://www.phoenixcontact.com/us/products/1406411 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Coding T Cable/line Signal type/category Power Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Environmental and real-life conditions Ambient conditions Degree of protection (when plugged in) IP67 (correctly plugged in and locked) Degree of protection IP67 (correctly plugged in and locked) IP20 (Not plugged in) IP67, when plugged in Ambient temperature (operation) -25 °C ... 105 °C -40 °C ... 105 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Mounting Mounting type PCB mounting Packaging specifications Type of packaging Tray Nov 6, 2024, 9:28 AM Page 3 (7) SACC-CI-M12FST-4CON-L180 THR - Contact carrier 1406411 https://www.phoenixcontact.com/us/products/1406411 Drawings Schematic diagram 4 3 1 2 Pin assignment of M12 socket, 4-pos., T-coded, socket side view Nov 6, 2024, 9:28 AM Page 4 (7) SACC-CI-M12FST-4CON-L180 THR - Contact carrier 1406411 https://www.phoenixcontact.com/us/products/1406411 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1406411   cUL Recognized Approval ID: E468743-20190917 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 63 V 12 A 16 - 16 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 63 V 12 A 16 - 16 - UL Recognized Approval ID: E468743-20190917 cULus Recognized Nov 6, 2024, 9:28 AM Page 5 (7) SACC-CI-M12FST-4CON-L180 THR - Contact carrier 1406411 https://www.phoenixcontact.com/us/products/1406411 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27460201 ETIM ETIM 9.0 EC002637 UNSPSC UNSPSC 21.0 39121400 Nov 6, 2024, 9:28 AM Page 6 (7) SACC-CI-M12FST-4CON-L180 THR - Contact carrier 1406411 https://www.phoenixcontact.com/us/products/1406411 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP ea5c2e47-df1f-4356-b262-ea750f2056c3 Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Nov 6, 2024, 9:28 AM Page 7 (7)