1406412

SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Contact carrier, Power, 4-position, Socket, straight, M12, coding: T, PCB mounting, THR solder connection, Alternative product in accordance with RoHS II without Exemption 6c (Pb IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Product properties Product type Contact insert Application Power Sensor type Power Number of positions 4 Seal present no Shielded yes Coding T Thread type M12 Data management status Article revision 05 Insulation characteristics Overvoltage category III Degree of pollution 3 Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 63 V Nominal current IN 12 A Connection data Connection method THR solder connection Interfaces Signal type/category Power Material specifications Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Oct 15, 2024, 12:39 AM Page 2 (15) SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Coding T Cable/line Signal type/category Power Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Environmental and real-life conditions Ambient conditions Degree of protection (when plugged in) IP67 (correctly plugged in and locked) Degree of protection IP67 (correctly plugged in and locked) IP67, when plugged in Ambient temperature (operation) -25 °C ... 105 °C -40 °C ... 105 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Mounting Mounting type PCB mounting Packaging specifications Type of packaging Tray Oct 15, 2024, 12:39 AM Page 3 (15) SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Drawings Schematic diagram 4 3 1 2 Pin assignment of M12 socket, 4-pos., T-coded, socket side view Oct 15, 2024, 12:39 AM Page 4 (15) SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1406412   cUL Recognized Approval ID: E468743-20190917 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 63 V 12 A 16 - 16 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 63 V 12 A 16 - 16 - UL Recognized Approval ID: E468743-20190917 cULus Recognized Oct 15, 2024, 12:39 AM Page 5 (15) SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27460201 ETIM ETIM 9.0 EC002637 UNSPSC UNSPSC 21.0 39121400 Oct 15, 2024, 12:39 AM Page 6 (15) SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 6b8e5807-4743-4c34-899f-099156fa016e Oct 15, 2024, 12:39 AM Page 7 (15) SACC-CI-M12FST-4CON-L180 THR SH - Contact carrier 1406412 https://www.phoenixcontact.com/us/products/1406412 Accessories SACC-M12-SCO NUT - Housing screw connection 1552243 https://www.phoenixcontact.com/us/products/1552243 Housing screw connection, Socket, M12-SPEEDCON, Front mounting, M12 x 1, Alternative product in accordance with RoHS II without Exemption 6c (Pb