https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Hybrid flush-type socket, Ethernet, 8-pos., M12-SPEEDCON, rear/screw mounting with M16 thread, 360° shield
connection with connected shielded hybrid cable
M12 panel feed-through, rear
mounting
Your advantages
Pre-assembled with cables in various standard lengths for immediate use
Customer-specific assemblies and cable lengths can be supplied
Cable designs for all common networks and fieldbuses
For high transmission safety: shield connection to the housing with optional EMC nut
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
30 pc
GTIN
GTIN
4046356807890
Weight per Piece (excluding packing)
460.000 g
Custom tariff number
85444290
Country of origin
Germany
Technical data
Dimensions
Length of cable
5m
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C
01/09/2020 Page 1 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Technical data
Ambient conditions
Degree of protection
IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
6 A (Power)
0.5 A (Data)
Rated voltage
48 V AC (Power and data)
50 V DC (Power and data)
Rated surge voltage
0.8 kV
Number of positions
8
Insulation resistance
≥ 100 MΩ
Coding
Y - hybrid
Standards/regulations
M12 connector
Overvoltage category
III
Degree of pollution
3
Insertion/withdrawal cycles
≥ 100
Torque
2 Nm ... 3 Nm
Mounting type
Rear mounting M16 x 1.5
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PPA
Material
Zinc die-cast (nickel-plated)
Sealing material
FKM
Standards and Regulations
Standard designation
M12 connector
Flammability rating according to UL 94
V0
Safety note
WARNING: The connectors may not be plugged in or disconnected under
load. Ignoring the warning or improper use may damage persons and/or
property.
• WARNING: Commission properly functioning products only. The products
must be regularly inspected for damage. Decommission defective products
immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate
the product. They must observe the following safety notes. The qualified
01/09/2020 Page 2 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Technical data
Standards and Regulations
personnel must be familiar with the basics of electrical engineering. They
must be able to recognize and prevent danger. The relevant symbol on the
packaging indicates that only personnel familiar with electrical engineering
are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and
electrical device engineering.
• When operating the connectors in outdoor applications, they must be
separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the
standards listed (e.g. the ones listed in the product accessories online at
phoenixcontact.com/products).
• When using the product in direct connection with third-party
manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must
be grounded
• Ensure that when laying the cable, the tensile load on the connectors
does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The
suitable accessories are available online in the accessory section of the
product at phoenixcontact.com/products
• Ensure that the protective or functional ground has been properly
connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are
applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient
conditions, the surface of the connector can continue to warm up. In
this case, the user is responsible for posting warnings (e.g. DIN EN ISO
13732-1:2008-12).
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
01/09/2020 Page 3 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Dimensional drawing
M12 socket, straight, shielded,
Dimensional drawing
M12 flush-type connector
01/09/2020 Page 4 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Circuit diagram
Contact assignment of the M12 connector
01/09/2020 Page 5 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Schematic diagram
Pin assignment of socket, 8-pos., Y-coded, socket side view
Classifications
eCl@ss
eCl@ss 10.0.1
27440102
eCl@ss 4.0
27140800
eCl@ss 4.1
27140800
eCl@ss 5.0
27143400
eCl@ss 5.1
27143400
eCl@ss 6.0
27279200
eCl@ss 7.0
27440103
eCl@ss 8.0
27440103
01/09/2020 Page 6 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Classifications
eCl@ss
eCl@ss 9.0
27440102
ETIM
ETIM 3.0
EC001855
ETIM 4.0
EC001855
ETIM 5.0
EC002061
ETIM 6.0
EC002061
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
UNSPSC 18.0
39121413
UNSPSC 19.0
39121413
UNSPSC 20.0
39121413
UNSPSC 21.0
39121413
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
30 V
Nominal current IN
4.5 A
E335024-20120308
01/09/2020 Page 7 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Approvals
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
30 V
Nominal current IN
4.5 A
E335024-20120308
EAC
B.00767
cULus Recognized
Accessories
Accessories
Corrugated pipe
Protective hose - WP-PA HF 13,0 BK - 3240681
Polyamide protective hose, inflammability class V0, UV resistant
Protective hose - WP-PA HF-HB 13,0 BK - 3240839
Polyamide protective hose, inflammability class HB, UV resistant
Cutting tools
01/09/2020 Page 8 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Accessories
Cable-cutting tool - CUTFOX 12 - 1212128
Cable cutter, for copper and aluminum up to 12 mm diameter (up to 35 mm²)
Diagonal cutter - CUTFOX-S VDE - 1212207
Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
Electronics pliers
Diagonal cutter - MICROFOX-SP-1 - 1212487
Electronic diagonal cutter, tapered head, without chamfer, with opening spring, non-reflective phosphate-treated surface,
punched version
Plug for cable screw gland
Screw plug - PROT-M12 - 1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug - PROT-M12 SH - 1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
01/09/2020 Page 9 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Accessories
Screw plug - PROT-M12 FB - 1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
Stripping tool
Stripping tool - WIREFOX 4 - 1212156
Stripping tool, for cables and conductors (especially for rubber and silicone insulations) from 0.1 - 4 mm², self-adjusting,
stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
Stripping tool - WIREFOX-E 4 - 1212704
Stripping tool, for cables and conductors (especially for rubber and silicone insulations) from 0.1 - 4 mm², self-adjusting,
stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
Stripping tool - WIREFOX 10 - 1212150
Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting
capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
Stripping tool - VS-CABLE-STRIP-VARIO - 1657407
Stripping tool, for the multi-level stripping of shielded cables
01/09/2020 Page 10 / 11
https://www.phoenixcontact.com/us/products/1407507
Flush-type socket - VS-FSBPYS-OE-94H/5,0 SCO - 1407507
Accessories
Protective hose adapter - WP-CTA POM 13,0 BK - 1422884
Protective hose adapter, for corrugated hoses with a nominal size of 13 (10 x 13), corrugated in parallel
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
01/09/2020 Page 11 / 11
