1407731

https://www.phoenixcontact.com/us/products/1407731 Contact insert - HC-B 16-I-PT-F - 1407731 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON socket insert, B16 series, 16 + PE-pos., push-in connection Product Features ■ ■ ■ ■ For fast coding with plastic profile Conductor connection without tools Significant time savings during conductor connection Test connection for 2 mm test plug Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 100.0 g Custom tariff number 85366990 Country of origin China Technical data General Note For HEAVYCON ADVANCE and HEAVYCON housing of B16 type. Plug-in connections may only be operated only when there is no load/voltage. Connection method Push-in connection Degree of pollution 3 Overvoltage category III Number of positions 16+PE Insertion/withdrawal cycles ≥ 500 Size B16 Conductor cross section 0.14 mm² ... 2.5 mm² Connection cross section AWG 26 ... 14 Stripping length 8 mm ... 10 mm 05/05/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1407731 Contact insert - HC-B 16-I-PT-F - 1407731 Technical data General Assembly instructions Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HCB10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. Connection Connectors may only be operated when there is no load/the power is switched off. Can be used for solid wires and stranded wires with ferrule. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag/Sn (tarnish protection) Contact carrier material PA Standards/regulations PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Electrical characteristics Rated voltage (III/3) 500 V Rated surge voltage 6 kV Rated current 16 A Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440205 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000438 05/05/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1407731 Contact insert - HC-B 16-I-PT-F - 1407731 Classifications ETIM ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / EAC / EAC / GL Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 14 Nominal current IN 10 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 14 Nominal current IN 13 A 05/05/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1407731 Contact insert - HC-B 16-I-PT-F - 1407731 Approvals     Nominal voltage UN 600 V EAC  EAC  GL  Drawings 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 16 Diagram Current strength [A] Schematic diagram 32 28 24 20 16 12 8 4 0 0 2 = 2,5 mm HC-B 06 PT 2 = 2,5 mm HC-B 10 PT 2 = 2,5 mm HC-B 16 PT 2 = 2,5 mm HC-B 24 PT 10 20 30 40 50 60 70 80 90 100 110 Ambient temperature [°C] Derating diagram for 2.5 mm² Dimensional drawing Dimensional drawing 72 20 82 27 27 34 77,1 37 83,5 Ø3,4 35 Connector pin assignment, connection side 77,5 Dimensional drawing Mounting cutout when used without housing Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/05/2016   Page 4 / 4