1407737

https://www.phoenixcontact.com/us/products/1407737 Contact insert - HC-B 24-I-PT-F-48 - 1407737 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON socket insert, B24 series, 24 + PE-pos., pos. marking 25-48, push-in connection Product Features ■ ■ ■ ■ For fast coding with plastic profile Conductor connection without tools Significant time savings during conductor connection Test connection for 2 mm test plug Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 150.0 g Custom tariff number 85366990 Country of origin China Technical data General Connection method Push-in connection Degree of pollution 3 Overvoltage category III Number of positions 24+PE Insertion/withdrawal cycles ≥ 500 Size B24 Conductor cross section 0.14 mm² ... 2.5 mm² Connection cross section AWG 26 ... 14 Stripping length 8 mm ... 10 mm Assembly instructions Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HCB10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. 03/11/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1407737 Contact insert - HC-B 24-I-PT-F-48 - 1407737 Technical data General Connection Connectors may only be operated when there is no load/the power is switched off. Can be used for solid wires and stranded wires with ferrule. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag/Sn (tarnish protection) Contact carrier material PA Standards/regulations PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Electrical characteristics Rated voltage (III/3) 500 V Rated surge voltage 6 kV Rated current 16 A Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 03/11/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1407737 Contact insert - HC-B 24-I-PT-F-48 - 1407737 Classifications UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / EAC / GL Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 14 Nominal current IN 10 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 14 Nominal current IN 13 A Nominal voltage UN 600 V 03/11/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1407737 Contact insert - HC-B 24-I-PT-F-48 - 1407737 Approvals EAC  GL  Drawings 32 28 24 20 16 12 8 4 0 0 Dimensional drawing 110,3 34 104 27 2 = 2,5 mm HC-B 06 PT 2 = 2,5 mm HC-B 10 PT 2 = 2,5 mm HC-B 16 PT 2 = 2,5 mm HC-B 24 PT 10 20 30 40 50 37 Current strength [A] Diagram 60 70 80 90 100 110 Ambient temperature [°C] Dimensional drawing Derating diagram for 2.5 mm² Dimensional drawing Schematic diagram 108 20 Ø3,4 104 35 27 98 25 37 26 38 27 39 28 40 29 41 30 42 31 43 32 44 33 45 34 46 35 47 36 48 Mounting cutout when used without housing Connector pin assignment, connection side Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/11/2016   Page 4 / 4