1408415

https://www.phoenixcontact.com/us/products/1408415 Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA - 1408415 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, 4-position, PlugLink:M12, A - standard, Front mounting, M20 x 1,5, Individual wires, Cable length: 0.5 m Why buy this product ■ ■ ■ ■ ■ Pre-assembled with litz wires for immediate use Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 40.0 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP69K General 08/02/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1408415 Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA - 1408415 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting M20 x 1,5 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Stainless steel Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors brown, white, blue, black Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V 08/02/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1408415 Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA - 1408415 Technical data Cable Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Drawings Schematic diagram 4 3 1 2 Ø20 +0,2 M20x1,5 45 ° Dimensional drawing Housing cutout for M20 fastening thread, mounting panel with thread Pin assignment M12 plug, 4-pos., A-coded, view plug side Dimensional drawing Circuit diagram 500 23 M12x1 M20x1,5 6,8 3 1 BN 2 WH 4 BK 3 BU 20 M12 flush-type plug Contact assignment of the M12 plug and the M12 socket Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27279201 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 08/02/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1408415 Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA - 1408415 Classifications eCl@ss eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cULus Recognized / EAC Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V 08/02/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1408415 Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA - 1408415 Approvals cULus Recognized      mm²/AWG/kcmil 20 Nominal current IN 4A Nominal voltage UN 250 V EAC  Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/02/2016   Page 5 / 5