1408989

https://www.phoenixcontact.com/gb/products/1408989 Connector - SACC-M12FRT-4CON-PG11-M - 1408989 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 4-position, Socket angled M12, T-coded, Screw connection, Knurl material: Zinc die-cast, nickelplated, Cable gland Pg11, External cable diameter 8 mm ... 10 mm, for direct current up to 12 A/60 V, Contact 4 leading Why buy this product  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  High-performance: DC connectors for up to 12 A and 60 V DC  Protection against incorrect connection using special T-coding   Key commercial data Packing unit 1 GTIN Custom tariff number 85366990 Technical data Dimensions External diameter 8 mm ... 10 mm Ambient conditions Degree of protection IP67 General Note Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. Rated current at 40°C 12 A Rated voltage 63 V DC Number of positions 4 Contact resistance ≤ 3 mΩ Insulation resistance > 10 GΩ 12/09/2014   Page 1 / 3 https://www.phoenixcontact.com/gb/products/1408989 Connector - SACC-M12FRT-4CON-PG11-M - 1408989 Technical data General Coding T power Standards/regulations IEC 61076-2-111 Status display No Surge voltage category III Pollution degree 3 Connection method Screw connection Conductor cross section 0.75 mm² ... 1.5 mm² AWG conductor cross section 18 ... 16 Insertion/withdrawal cycles > 100 Torque 0.4 Nm (M12 knurl) 1 Nm ... 1.4 Nm (Pressure nut with coupling sleeve) 0.4 Nm (Connector with coupling sleeve) 0.2 Nm (Screw terminal blocks) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 46 Material of grip body PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material Viton (M12 socket) NBR (Cable clamping) Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 ETIM ETIM 2.0 EC001121 ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 12/09/2014   Page 2 / 3 https://www.phoenixcontact.com/gb/products/1408989 Connector - SACC-M12FRT-4CON-PG11-M - 1408989 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Drawings Schematic diagram Dimensioned drawing 4 Ø20,2 1 M12x1 3 2 18 Ø8 - Ø10 Connector pin assignment of M12 socket, 4-pos., T-coded, view of socket side !39 19 M12 x 1 socket, straight Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 12/09/2014   Page 3 / 3