1408991

SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Power connector, 4-position, Socket angled M12, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm Your advantages • Safe use in the field, thanks to a high degree of protection • Screw connection: proven connection technology for a large selection of different conductors Commercial data Item number 1408991 Packing unit 1 pc Minimum order quantity 1 pc Sales key BF30 Product key BF2CAA Catalog page Page 22 (C-2-2019) GTIN 4046356885119 Weight per piece (including packing) 28.21 g Weight per piece (excluding packing) 28.76 g Customs tariff number 85366990 Country of origin DE Jan 7, 2025, 7:56 AM Page 1 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Technical data Notes General Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. Assembly note NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. Mounting Assembly note The connector pin assignment can be rotated 90° to the cable outlet Product properties Product type Circular connector (cable-side) Application Power supply Number of positions 4 No. of cable outlets 1 Shielded no Coding A Cable outlet angled Pg screw connection Pg11 Insulation characteristics Overvoltage category II Degree of pollution 3 Dimensions Dimensional drawing Length 39 mm External dimensions Outside diameter 8 mm ... 10 mm Housing Diameter housing 20.2 mm Material specifications Flammability rating according to UL 94 V0 Jan 7, 2025, 7:56 AM Page 2 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Seal material Viton NBR Material of grip body PA Contact material CuZn Contact surface material Ni/Au Contact carrier material PA Material for screw connection Zinc die-cast, nickel-plated Connection data Conductor connection Connection method Screw connection Connection cross section 0.75 mm² ... 1.5 mm² (without ferrule) 0.75 mm² ... 1.5 mm² (with ferrule) 0.75 mm² ... 1.5 mm² (solid) Connection cross section AWG 18 ... 16 (without ferrule) 16 ... 18 (with ferrule) Stripping length of the individual wire 5 mm Tightening torque 0.4 Nm (M12 knurl) 1.5 Nm ... 2 Nm (Pressure screw with sleeve housing) 0.4 Nm (Screw plug insert with sleeve housing as far it will go) 0.2 Nm (Screw terminal blocks) Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance > 10 GΩ Nominal voltage UN 250 V AC 250 V DC Nominal current IN 8 A (when using 1.5 mm² conductors) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet angled Head thread type M12 Coding A Cable/line Stripping length of the individual wire 5 mm Jan 7, 2025, 7:56 AM Page 3 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Environmental and real-life conditions Ambient conditions Degree of protection IP67 Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Standards and regulations Standard designation M12 connector Standards/specifications IEC 61076-2-101 Jan 7, 2025, 7:56 AM Page 4 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Drawings Dimensional drawing Ø20,2 M12x1 ≈39 Ø8 - Ø10 19 18 M12 x 1 socket, straight Jan 7, 2025, 7:56 AM Page 5 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Schematic diagram 3 4 2 1 Pin assignment M12 socket, 4-pos., A-coded, view female side Jan 7, 2025, 7:56 AM Page 6 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1408991   cUL Recognized Approval ID: FILE E 221474 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A - - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A - - UL Recognized Approval ID: FILE E 221474 cULus Recognized Jan 7, 2025, 7:56 AM Page 7 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Jan 7, 2025, 7:56 AM Page 8 (9) SACC-M12FR-4CON-PG11-M PWR - Power connector 1408991 https://www.phoenixcontact.com/us/products/1408991 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 8eda3e49-4627-4828-bc1c-b6d459899d55 Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 7, 2025, 7:56 AM Page 9 (9)