1409053

https://www.phoenixcontact.com/us/products/1409053 Housing set - HC-MOT-AFL-SET - 1409053 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Connector on motor side, EMC metal housing attachment incl. crimp contact insert, with flat seal and coated protective cover, without crimp contacts, housing with coatable thick-layer passivation Key commercial data Packing unit 1 PCE Custom tariff number 79070000 Country of origin Germany Technical data General Pollution degree 3 Surge voltage category III Insertion/withdrawal cycles ≥ 100 Design MOT Conductor cross section 0.35 mm² ... 2.5 mm² (Power crimp contacts) 0.14 mm² ... 1 mm² (Control crimp contacts) Connection cross section AWG 20 ... 14 (Power crimp contacts) 26 ... 18 (Control crimp contacts) Stripping length of the individual wire 6 mm (Power crimp contacts) 4.5 mm (Control crimp contacts) Ambient conditions Ambient temperature (operation) -30 °C ... 100 °C Degree of protection IP67 Material data Inflammability class according to UL 94 V0 Seal material EPDM 11/22/13   Page 1 / 5 https://www.phoenixcontact.com/us/products/1409053 Housing set - HC-MOT-AFL-SET - 1409053 Technical data Material data Housing material GD-Zn Contact material Copper alloy Contact surface material Au Material of contact surface, power contact Au Material of contact surface, control contact Au Contact carrier material PA Electrical characteristics Rated voltage for power contacts 400/800 V Rated voltage (III/3) 250 V (Signal) Rated surge voltage 6 kV (Phase/housing power circuit) 8 kV (Phase/phase power circuit) 4 kV (Control circuit) Rated current 16.5 A (power contacts) 2.5 A (control contacts) Technical data according to UL approval Nominal voltage, power contact 600 V Nominal current, power contact 16.5 A Nominal voltage, signal contact 250 V Nominal current, signal contact 2.5 A Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440209 ETIM ETIM 4.0 EC000437 ETIM 5.0 EC000437 UNSPSC UNSPSC 6.01 30211923 11/22/13   Page 2 / 5 https://www.phoenixcontact.com/us/products/1409053 Housing set - HC-MOT-AFL-SET - 1409053 Classifications UNSPSC UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / CSAus / GOST / UL Listed / cCSAus Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 18 Nominal current IN 2.5 A Nominal voltage UN 250 V CSAus      mm²/AWG/kcmil 18 Nominal current IN 2.5 A Nominal voltage UN 250 V GOST  11/22/13   Page 3 / 5 https://www.phoenixcontact.com/us/products/1409053 Housing set - HC-MOT-AFL-SET - 1409053 Approvals UL Listed      mm²/AWG/kcmil 18 Nominal current IN 2.5 A Nominal voltage UN 250 V cCSAus  Accessories Accessories Coding element Coding profile - CP-HCC 4 - 1600027 Coding profile, Number of positions: 1, Color: red     Protective cover Protective cap - HC-MOT-SD-L-KU - 1409147 Coated protective cover for the housing on the motor side     Seal Grommet - HC-MOT-AFL-FL-DI - 1409257 Flat gasket for flange     11/22/13   Page 4 / 5 https://www.phoenixcontact.com/us/products/1409053 Housing set - HC-MOT-AFL-SET - 1409053 Drawings Dimensioned drawing 25 75 75 1 20 11,8 72 15 10 47 1 = 1,5 mm 5 2 19 Current strength [A] Diagram 0 M12x1,5 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Ambient temperature [°C] Derating diagram Dimensional drawing Dimensioned drawing Schematic diagram 70,2 ±0,2 2 ±0,1 1 V2 W1 U2 V1 W2 U1 1,5* 5 60 60 60 4 3 ±0,1 60 Connector pin assignment, connection side 10 70,2 ±0,2 M4 5 10 ±0,1 R5 Flange drawing (1.5* interface dimensions up to this height). © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 11/22/13   Page 5 / 5