1409217

https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Circular connectors (cable-side), Range of articles: PRC, Coupler connector, type: Can only be released with a tool, housing material: PPE, color: black, number of positions: 3, min. conductor cross section: 1.5 mm², max. conductor cross section: 6 mm², nom. voltage: 690 V AC, rated current: 35 A, Connection method: Screw connection, Type of contact: Socket, min. cable diameter: 12 mm, max. cable diameter: 16 mm Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356867702 Weight per Piece (excluding packing) 80.000 g Custom tariff number 85366990 Country of origin Poland Technical data General data Number of positions 3 Protection class II Color black Locking type Snap-in locking Insertion/withdrawal cycles 100 Pull-out-force 150 N ± 50 N Insertion force 30 N ±10 N Degree of protection (when plugged in) IP66 / IP68 (2m / 24h) / IP69K (IP69K measured at Phoenix Contact approval laboratory) Connection data 12/22/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Technical data Connection data Rated current 35 A (With 6 mm² conductor cross section in accordance with IEC 61984) 32 A (With 6 mm² conductor cross section in accordance with IEC 61535) 21.4 A (With 6 mm² conductor cross section and 85 °C in accordance with 2 PfG 1915) 35 A (With 6 mm²/AWG 10, in accordance with UL 2238) Nominal voltage ATD 690 V AC (in accordance with IEC 61984) 500 V AC (in accordance with IEC 61535/2 PfG 1915) 600 V AC (In accordance with UL 2238) Rated voltage (III/2) 690 V Stripping length 12 mm Torque max. 1 Nm (Contact screw) Type of contact Socket Stripping length of the sheath 50 mm Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 4 mm² Conductor cross section flexible max. 6 mm² Material data Contact material Cu Contact surface material silver-plated Contact carrier material PPE Flammability rating according to UL 94 V0 Standards and Regulations Halogen-free yes Flammability rating according to UL 94 V0 Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. 12/22/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Technical data Standards and Regulations WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • Operate the connector only when it is fully plugged in. • Operate the connector only when it is fully plugged in and interlocked. • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/22/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Dimensional drawing Schematic diagram Schematic design 12/22/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Schematic diagram Connector pin assignment Classifications eCl@ss eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 12/22/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Classifications eCl@ss eCl@ss 7.0 27440102 eCl@ss 8.0 27440102 eCl@ss 9.0 27440103 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals DNV GL / TÜV Rheinland / TÜV Rheinland / TÜV Rheinland / UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAE00002KM 12/22/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Approvals TÜV Rheinland    http://www.certipedia.com  R 60117908 TÜV Rheinland    http://www.certipedia.com  R 60117904-0002     Nominal voltage UN 690 V Nominal current IN 35 A mm²/AWG/kcmil 6 TÜV Rheinland    http://www.certipedia.com  R 60117904-0001 UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20150513     Nominal voltage UN 600 V Nominal current IN 35 A mm²/AWG/kcmil 14-10 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 600 V Nominal current IN 35 A mm²/AWG/kcmil 14-10 EAC      E221474-20150513  B.01742 12/22/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/1409217 Coupler connector - PRC 3-FC-FS6 12-16 - 1409217 Approvals cULus Listed       Accessories Accessories Circular connector (cable-side) Protective cap - PRC COVER F - 1409236 Protective cap for 3 and 5-pos. PRC field plugs     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip     Philips screwdriver - SF-PH 1-80 S-VDE - 1212693 Screwdriver, crosshead PH (lasered), insulated, size: PH 1 x 80, 2-component handle, with non-slip grip     12/22/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/1409217 Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 12/22/2019   Page 9 / 9