1410666

https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 8-position, Plug straight M12, A-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, Cable gland Pg11, External cable diameter 8 mm ... 10 mm The figure shows the version with Pg9 screw connection Why buy this product  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356904650 Weight per Piece (excluding packing) 20.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 8 mm ... 10 mm Stripping length of the sheath 20 mm Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) 01/27/2017   Page 1 / 5 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Technical data Ambient conditions Degree of protection IP67 General Rated current at 40°C 2A Rated voltage 30 V Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.5 mm² Conductor cross section AWG 24 ... 20 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 HB Drawings 01/27/2017   Page 2 / 5 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Schematic diagram Dimensional drawing Ø20 M12x1 65,5 Pin assignment M12 plug, 8-pos., A-coded, view plug side 18 19 Plug, M12 x 1, straight, shielded Classifications eCl@ss eCl@ss 4.1 27250313 eCl@ss 5.1 27260701 eCl@ss 6.0 27279221 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details 01/27/2017   Page 3 / 5 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Approvals EAC      EAC-Zulassung Accessories Accessories Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 sockets     Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Torque tool 01/27/2017   Page 4 / 5 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Accessories Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/27/2017   Page 5 / 5