1411066

https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, Ethernet CAT5 (100 Mbps), 4-position, halogen-free, shielded, Plug straight M12 SPEEDCON, Dcoded, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 5 mm ... 9.7 mm Your advantages  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Insulation displacement connection: innovative and time-saving assembly without stripping the single wire  Reliable signal transmission - 360° shielding in environments with electromagnetic interference  Save time, thanks to installation with SPEEDCON fast locking system Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356921787 Weight per Piece (excluding packing) 40.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Wrench size, union nut 15 mm Diameter housing 19 mm Length 58 mm External cable diameter 5 mm ... 9.7 mm Stripping length of the sheath ≥ 80 mm 01/05/2020   Page 1 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Ambient temperature (assembly) -5 °C ... 50 °C Degree of protection IP65 IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 4A Rated voltage 48 V AC 60 V DC Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector according to IEC 61076-2-101 Shock, vibration EN 50155:2001 Signal type/category Ethernet CAT5 (on the basis of IEC 11801), 100 Mbps Status display No Overvoltage category II Degree of pollution 3 Connection method Insulation displacement connection Conductor cross section 0.14 mm² ... 0.34 mm² (flexible) 0.14 mm² ... 0.34 mm² (solid) Conductor cross section AWG 26 ... 22 (flexible) 26 ... 22 (solid) Wire diameter including insulation 0.75 mm ... 2 mm Frequency of connections between conductors of the same cross section 10 Wire insulation material PVC / PE / PP / rubber Structure of individual litz in acc. with VDE 0295 / smallest wire diameter Class 2-6 Insertion/withdrawal cycles ≥ 100 Torque 5 Nm (Pressure nut) Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material PA 6.6 01/05/2020   Page 2 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Technical data Material Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Standards and Regulations Standard designation M12 connector Standards/regulations according to IEC 61076-2-101 Standard designation Shock, vibration Standards/regulations EN 50155:2001 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Dimensional drawing Plug, M12 x 1, straight, shielded 01/05/2020   Page 3 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Schematic diagram Pin assignment M12 male connector, 4-pos., D-coded, male side 01/05/2020   Page 4 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Functional drawing Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 5.0 EC002635 ETIM 6.0 EC002635 ETIM 7.0 EC002635 Approvals Approvals Approvals EAC 01/05/2020   Page 5 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Approvals Ex Approvals Approval details EAC      EAC-Zulassung Accessories Accessories Data cable by the meter Network cable - VS-OE-OE-93E/... - 1417320 Network cable, Ethernet CAT5 (100 Mbps), 4-position, PUR halogen-free, water blue RAL 5021, shielded, free cable end, on free cable end, cable length: Free input (0.5 ... 100 m)     Electronics pliers Diagonal cutter - MICROFOX-SB - 1212489 Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter     Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs     Screwdriver tools 01/05/2020   Page 6 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Accessories Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Stripping tool Stripping tool - WIREFOX-D 40 - 1212161 Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     01/05/2020   Page 7 / 8 https://www.phoenixcontact.com/us/products/1411066 Connector - SACC-MSD-4QO SH ETH SCO - 1411066 Accessories Shielding foil - VS-08-RJ45-FOLIEN-SET - 1417184 Shielding foil set, 25 pieces, replacement for RJ45 and M12 Quickon connector     Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 01/05/2020   Page 8 / 8