1411199

https://www.phoenixcontact.com/us/products/1411199 Cable gland - G-INSEC-PG16-S68N-NNES-S - 1411199 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Cable gland, Cable gland material: Brass, nickel-plated, External cable diameter 10 mm ... 14 mm, Shielding: yes, Connecting thread: Pg16, Color: silver Key Commercial Data Packing unit 1 pc Minimum order quantity 5 pc Weight per Piece (excluding packing) 40.0 g Custom tariff number 74199990 Country of origin Turkey Technical data Dimensions Length 33 mm Wrench size, union nut 24 mm Wrench size, support 24 mm Hexagon angular dimension GRP 26.8 mm Length of the connecting thread 6.5 mm Feed-through hole diameter 22.6 mm ... 22.8 mm External cable diameter 10 mm ... 14 mm Ambient conditions Degree of protection IP68 Ambient temperature (operation) -20 °C ... 100 °C (static) General No. of conductors 1 03/15/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1411199 Cable gland - G-INSEC-PG16-S68N-NNES-S - 1411199 Technical data General Cable gland material Brass, nickel-plated Seal material Neoprene Cable seal material Neoprene O-ring material NBR Shielded yes Thread type on connection side Pg16 Torque 7 Nm (Union nut) Color silver Standards and Regulations Connection in acc. with standard UL Classifications eCl@ss eCl@ss 5.1 27149109 eCl@ss 6.0 27149109 eCl@ss 8.0 27149109 ETIM ETIM 4.0 EC000441 ETIM 5.0 EC000441 Approvals Approvals Approvals UL Recognized Ex Approvals Approvals submitted Approval details 03/15/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1411199 Cable gland - G-INSEC-PG16-S68N-NNES-S - 1411199 Approvals UL Recognized  Drawings Dimensional drawing !33 26,8 PG 16 6,5 24 24 Dimensional drawing Functional drawing Assembly instructions: Method 1 03/15/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1411199 Cable gland - G-INSEC-PG16-S68N-NNES-S - 1411199 Slit the outer sheath after approximately 15 mm, but do not remove it. Guide the cable through the screw connection and then remove the outer sheath. Now withdraw the cable until a connection is established between the conductor shield and the contact spring. Method 2 Push the braided shield back approximately 15 - 20 mm over the outer sheath. Insert the cable into the screw connection until a connection is established between the conductor shield and the contact spring. Method 3 Uncover about 10 mm of the braided shield and guide the cable through the screw connection until a connection is established between the conductor shield and the contact spring. Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/15/2016   Page 4 / 4