1411605

https://www.phoenixcontact.com/gb/products/1411605 Flush-type connector - SACC-E-M12FSS-4P-M16XL/0,5 PE - 1411605 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, Power, 4-position, SocketLink:M12, S power, Front mounting, M16 x 1.5, Individual wires, Cable length: 0.5 m Why buy this product  For compact devices: transmit high power in a confined space  Easy-to-install, optimized XL housing contour with wrench size 19  Tightening limitation for the O-ring gasket  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356936194 Weight per Piece (excluding packing) 48.600 g Custom tariff number 85366990 Country of origin Germany Note Made to Order (non-returnable) Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General 12/22/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1411605 Flush-type connector - SACC-E-M12FSS-4P-M16XL/0,5 PE - 1411605 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 12 A Rated voltage 630 V Rated surge voltage 6 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding S power Standards/regulations M12 connector Signal type/category Power Status display No Overvoltage category III Degree of pollution 3 Test voltage 6 kV Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 0.8 Nm ... 1.3 Nm (Installation-side) Mounting type Front mounting M16 x 1.5 Tightening limitation Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type PP litz wire Conductor cross section 1.5 mm² AWG signal line 16 Wire colors Black 1, black 2, black 3, green/yellow Material conductor insulation PP Conductor material Bare Cu litz wires Standards/specifications M12 connector Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) -40 °C ... 90 °C (cable, fixed installation) -30 °C ... 90 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector 12/22/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1411605 Flush-type connector - SACC-E-M12FSS-4P-M16XL/0,5 PE - 1411605 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram Dimensional drawing 24,1 5 22,6 2,8 L 1 3 Pin assignment of M12 socket, 4-pos., S-coded, socket side view M12x1 M16x1,5 2 19 11,5 M12 flush-type socket Circuit diagram 1 BK1 2 BK2 3 BK3 4 GN/YE Contact assignment of the M12 socket Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 12/22/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1411605 Flush-type connector - SACC-E-M12FSS-4P-M16XL/0,5 PE - 1411605 Classifications UNSPSC UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 16 Nominal current IN 12 A Nominal voltage UN 600 V cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 16 Nominal current IN 12 A Nominal voltage UN 600 V  FILE E 468743  FILE E 468743 EAC      B.01742 cULus Listed       Accessories Accessories 12/22/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1411605 Flush-type connector - SACC-E-M12FSS-4P-M16XL/0,5 PE - 1411605 Accessories Flat nut Flat nut - SACC-E-MU-M16 - 1504097 Flat nut with M16 thread     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 5 / 5