1411948

https://www.phoenixcontact.com/gb/products/1411948 Flush-type connector - SACC-CIP-M12MST-4P SMD T - 1411948 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, Power, 4-position, PlugLink:straightLink:M12, T power, PCB mounting, SMD Why buy this product  For compact devices: transmit high power in a confined space  Reduced mounting costs thanks to two-piece device connector  Packaging available for automated pick and place assembly  All common pin assignments and codings available  Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate  Additional gasket for the device when not plugged in Key Commercial Data Packing unit 60 STK Minimum order quantity 60 STK GTIN GTIN 4046356990752 Weight per Piece (excluding packing) 4.650 g Custom tariff number 85366990 Country of origin Germany Note Made to Order (non-returnable) Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 105 °C (Plug / socket) -40 °C ... 105 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) General 12/22/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1411948 Flush-type connector - SACC-CIP-M12MST-4P SMD T - 1411948 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 12 A Rated voltage 63 V Rated surge voltage 1.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding T power Standards/regulations M12 connector IEC 61076-2-111 In line with Signal type/category Power Overvoltage category III Degree of pollution 3 Connection method SMD Insertion/withdrawal cycles > 100 Mounting type PCB mounting Type of packaging Tray Delivery state with assembly pad Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Sealing material FKM Cable Standards/specifications M12 connector IEC 61076-2-111 In line with Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-111 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/22/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1411948 Flush-type connector - SACC-CIP-M12MST-4P SMD T - 1411948 Schematic diagram Ø2,5 4 3 Ø1,5⁰⁰³ 9!⁰⁰² Connector pin assignment of M12 plug, 4-pos., T-coded, view of pin side Ø1,9 13,6 3,61 2 2,25 1 Drilling diagram Ø1,1⁰⁰³ 7,85 Soldering pad geometry Dimensional drawing Ø10,2 Ø9,45 M12 male connector contact carrier Ø1!⁰⁰³ 1,35 12,7 9!⁰⁰⁵ 21,4 Ø1,4!⁰⁰³ Ø1,3⁰⁰⁵ Dimensional drawing 7,25 View of solder side Dimensional drawing SMD tray packaging 12/22/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1411948 Flush-type connector - SACC-CIP-M12MST-4P SMD T - 1411948 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal current IN 10 A Nominal voltage UN 63 V cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal current IN 8A Nominal voltage UN 63 V EAC      FILE E 468743  FILE E 468743  B.01742 12/22/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1411948 Flush-type connector - SACC-CIP-M12MST-4P SMD T - 1411948 Approvals cULus Listed       Accessories Accessories Panel mounting base Housing screw connection - SACC-BP-M-M12/M15-6-SMD - 1414000 Housing screw connection, PlugLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-M-M12/M15-6-SMD SCO - 1414002 Housing screw connection, PlugLink:M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-FP-M-M12/M14 SMD - 1412078 Housing screw connection, PlugLink:M12, Front mounting, M14 x 1     Housing screw connection - SACC-FP-M-M12/PRESS SMD - 1412080 Housing screw connection, pin, for the two-part M12 SMD connector, for press-in mounting.     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 5 / 5