1411974

https://www.phoenixcontact.com/pi/products/1411974 Flush-type connector - SACC-CI-M12FS-4P SMD R32 - 1411974 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, 4-position, SocketLink:straightLink:M12, A - standard, PCB mounting, SMD Why buy this product ■ ■ ■ ■ Reduced mounting costs thanks to two-piece device connector Packaging available for automated pick and place assembly All common pin assignments and codings available Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate Key Commercial Data Packing unit 100 STK Minimum order quantity 100 STK GTIN Technical data Ambient conditions Ambient temperature (operation) -55 °C ... 105 °C (Plug / socket) -55 °C ... 105 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 In line with 03/08/2016   Page 1 / 3 https://www.phoenixcontact.com/pi/products/1411974 Flush-type connector - SACC-CI-M12FS-4P SMD R32 - 1411974 Technical data General Overvoltage category II Degree of pollution 3 Connection method SMD Insertion/withdrawal cycles > 100 Mounting type PCB mounting Type of packaging Belt Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 8.0 27440103 ETIM ETIM 5.0 EC002061 Drawings Schematic diagram 3 Drilling diagram 4 Ø2,5 9!⁰⁰² Pin assignment M12 socket, 4-pos., A-coded, view female side Ø1,5 13,6 1 2,25 2 3,54 Ø1,5⁰⁰³ Ø1,1⁰⁰³ 7,85 Soldering pad geometry 03/08/2016   Page 2 / 3 https://www.phoenixcontact.com/pi/products/1411974 Flush-type connector - SACC-CI-M12FS-4P SMD R32 - 1411974 Dimensional drawing Ø10,2 12,7 18 Ø1!⁰⁰³ 9!⁰⁰⁵ Ø8,2 Ø0,9⁰⁰⁵ Ø1,4!⁰⁰³ Dimensional drawing 1,35 7,25 M12 female connector contact carrier View of solder side ≤ 20,55 Dimensional drawing 32 ±0,3 4 ±0,1 ±0,1 +0,1 1,5 Ø1,5 +0,1 24 ±0,1 28,4 0,2 ±0,05 SMD tape-on-reel packing Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 03/08/2016   Page 3 / 3