1411982

https://www.phoenixcontact.com/us/products/1411982 Flush-type connector - SACC-CI-M12MS-4P SMD R32 - 1411982 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, 4-position, Plug, straight, M12, A - standard, PCB mounting, SMD Your advantages  Reduced mounting costs thanks to two-piece device connector  Packaging available for automated pick and place assembly  All common pin assignments and codings available  Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate  Optional shield connection and seal for the device when not plugged in Key Commercial Data Packing unit 1 pc Minimum order quantity 100 pc GTIN GTIN 4046356991735 Weight per Piece (excluding packing) 6.600 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -55 °C ... 105 °C (Plug / socket) -55 °C ... 105 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) 07/30/2019   Page 1 / 4 https://www.phoenixcontact.com/us/products/1411982 Flush-type connector - SACC-CI-M12MS-4P SMD R32 - 1411982 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 In line with Overvoltage category II Degree of pollution 3 Connection method SMD Insertion/withdrawal cycles > 100 Mounting type PCB mounting Type of packaging Belt Delivery state with assembly pad Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Cable Standards/specifications M12 connector IEC 61076-2-101 In line with Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” 07/30/2019   Page 2 / 4 https://www.phoenixcontact.com/us/products/1411982 Flush-type connector - SACC-CI-M12MS-4P SMD R32 - 1411982 Classifications eCl@ss eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20160506     Nominal voltage UN 250 V Nominal current IN 4A Accessories Accessories 07/30/2019   Page 3 / 4 https://www.phoenixcontact.com/us/products/1411982 Flush-type connector - SACC-CI-M12MS-4P SMD R32 - 1411982 Accessories Panel mounting base Housing screw connection - SACC-BP-M-M12/M15-6-SMD - 1414000 Housing screw connection, Plug, M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-M-M12/M15-6-SMD SCO - 1414002 Housing screw connection, Plug, M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-FP-M-M12/M14 SMD - 1412078 M12 pin, front mounting SMD with M14 screw fastening     Housing screw connection - SACC-FP-M-M12/PRESS SMD - 1412080 Housing screw connection, pin, for the two-part M12 SMD connector, for press-in mounting.     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 07/30/2019   Page 4 / 4