https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Flush-type connector, 4-position, PlugLink:straightLink:M12, A - standard, PCB mounting, SMD
Why buy this product
■
■
■
■
■
Reduced mounting costs thanks to two-piece device connector
Packaging available for automated pick and place assembly
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front
plate
Additional gasket for the device when not plugged in
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
100 STK
Weight per Piece (excluding packing)
6.8 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 105 °C (Plug / socket)
-55 °C ... 105 °C (without mechanical actuation)
Degree of protection
IP67 (correctly plugged in and locked)
IP65 (not plugged in, by means of additional O-ring seal with device)
General
08/05/2016 Page 1 / 6
https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
Technical data
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
4A
Rated voltage
250 V
Rated surge voltage
2.5 kV
Number of positions
4
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101 In line with
Overvoltage category
II
Degree of pollution
3
Connection method
SMD
Insertion/withdrawal cycles
> 100
Mounting type
PCB mounting
Type of packaging
Belt
Delivery state
with assembly pad
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA
Sealing material
FKM
Cable
Standards/specifications
M12 connector IEC 61076-2-101 In line with
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Flammability rating according to UL 94
V0
Drawings
08/05/2016 Page 2 / 6
https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
Schematic diagram
4
Drilling diagram
3
Ø2,5
9!⁰⁰²
Pin assignment M12 plug, 4-pos., A-coded, view
plug side
Ø1,5
13,6
2
2,25
1
3,54
Ø1,5⁰⁰³
Ø1,1⁰⁰³
7,85
Soldering pad geometry
Ø9,45
M12 male connector contact carrier
Ø1!⁰⁰³
1,35
12,7
9!⁰⁰⁵
21,4
Dimensional drawing
Ø10,2
Ø1,4!⁰⁰³
Ø0,9⁰⁰⁵
Dimensional drawing
7,25
View of solder side
08/05/2016 Page 3 / 6
https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
≤ 24,95
Dimensional drawing
32
±0,3
4
±0,1
±0,1
+0,1
1,5
Ø1,5
+0,1
24
±0,1
28,4
0,2
±0,05
SMD tape-on-reel packing
Classifications
eCl@ss
eCl@ss 5.1
27143423
eCl@ss 6.0
27143423
eCl@ss 8.0
27440103
eCl@ss 9.0
27440102
ETIM
ETIM 5.0
EC002061
Approvals
Approvals
Approvals
EAC / cULus Recognized
Ex Approvals
Approvals submitted
08/05/2016 Page 4 / 6
https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
Approvals
Approval details
EAC
cULus Recognized
Nominal current IN
4A
Nominal voltage UN
250 V
Accessories
Accessories
Contact insert
Sample set - SACC-CIP-M12MS-4P SMD-SP - 1418643
Sample set, 4-position, PlugLink:straightLink:M12, A - standard, PCB mounting, SMD
Panel mounting base
Housing screw connection - SACC-BP-M-M12/M15-6-SMD - 1414000
Housing screw connection, PlugLink:M12, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-M-M12/M15-6-SMD SCO - 1414002
Housing screw connection, PlugLink:M12-SPEEDCON, Rear mounting, M15 x 1
08/05/2016 Page 5 / 6
https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
Accessories
Housing screw connection - SACC-FP-M-M12/M14 SMD - 1412078
Housing screw connection, PlugLink:M12, Front mounting, M14 x 1
Housing screw connection - SACC-FP-M-M12/PRESS SMD - 1412080
Housing screw connection, pin, for the two-part M12 SMD connector, for press-in mounting.
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
08/05/2016 Page 6 / 6
