1412250

https://www.phoenixcontact.com/pi/products/1412250 Flush-type connector - SACC-CIP-M8FS-3P SMD R32 - 1412250 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, 3-position, SocketLink:straightLink:M8, A-coded, PCB mounting, SMD Why buy this product ■ ■ ■ ■ ■ Reduced mounting costs thanks to two-piece device connector Packaging available for automated pick and place assembly All common pin assignments and codings available Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate Additional gasket for the device when not plugged in Key Commercial Data Packing unit 100 STK Minimum order quantity 100 STK GTIN Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 105 °C (Plug / socket) -40 °C ... 105 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) IP65 (not plugged in, by means of additional O-ring seal with device) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 3A Rated voltage 50 V AC 60 V DC Number of positions 3 Insulation resistance ≥ 100 MΩ 03/10/2016   Page 1 / 4 https://www.phoenixcontact.com/pi/products/1412250 Flush-type connector - SACC-CIP-M8FS-3P SMD R32 - 1412250 Technical data General Coding A - standard Standards/regulations M8 connector IEC 61076-2-104 Overvoltage category II Connection method SMD Insertion/withdrawal cycles > 100 Mounting type PCB mounting Type of packaging Belt Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Sealing material FKM Standards and Regulations Standard designation M8 connector Standards/regulations IEC 61076-2-104 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 8.0 27440103 ETIM ETIM 5.0 EC002061 Drawings 03/10/2016   Page 2 / 4 https://www.phoenixcontact.com/pi/products/1412250 Flush-type connector - SACC-CIP-M8FS-3P SMD R32 - 1412250 Schematic diagram Drilling diagram 7,85 4 Ø2,5 Ø1,5⁰⁰³ 1 8$⁰⁰² 2,25 12,6 Pin assignment M8 socket, 3-pos., view female side 3,5 Ø1,5 3 Ø1,1⁰⁰³ 1,75 Drilling diagram Dimensional drawing Ø8 17 Ø1!⁰⁰³ Ø8 11,9 8!⁰⁰⁵ Ø5,7 Ø0,9⁰⁰⁵ Ø1,4!⁰⁰³ Dimensional drawing 1,3 7,25 M8 flush-type socket View of solder side ≤ 19,5 Dimensional drawing 32 ±0,3 4 ±0,1 ±0,1 +0,1 Ø1,5 1,5 +0,1 24 ±0,1 28,4 0,2 ±0,05 SMD tape-on-reel packing 03/10/2016   Page 3 / 4 https://www.phoenixcontact.com/pi/products/1412250 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 03/10/2016   Page 4 / 4