1413364

https://www.phoenixcontact.com/us/products/1413364 Housing - HC-ADV-B06-HLWH-1TTM25-EMC-AL - 1413364 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON ADVANCE sleeve housing, B6, with stainless steel screw locking (Allen screw), salt-water-resistant aluminum, height 74 mm, with 1x M25 thread, straight cable outlet, without surface; conductive seal (EMC properties) Key Commercial Data Packing unit 1 STK Custom tariff number 85389099 Country of origin China Technical data Dimensions Height 74 mm Width 57 mm Length 92 mm Length of the assembly cutout 52 mm Width of the assembly cutout 35 mm Ambient conditions Degree of protection of housing (IP) IP66 IP68 (0.2 bar/24 h) IP69K (ISO 20653:2013-02) Degree of protection of housing (NEMA) 4 4X 6P 12 Ambient temperature (operation) -40 °C ... 125 °C 08/10/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/1413364 Housing - HC-ADV-B06-HLWH-1TTM25-EMC-AL - 1413364 Technical data General Note For contact inserts HC-B6, BB10, DD24, M Size B6 Housing type Sleeve housing Locking type Screw locking Fixing screws M6 (screw head: 5 mm Allen screw) No. of cable outlets 1 Cable exit straight Screw connection none Type of the screw connection 1x M25 Housing material Die-cast aluminum, salt water resistant Housing surface material Uncoated Seal material NBR, conductive Material lock Stainless steel Assembly instructions In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. Connection To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. Drawings Dimensional drawing Dimensional drawing 70 92 Dimensional drawing 35 32 74 52 Ø4,51) Ø3,62) 57 Mounting cutout 1) when M4 screws are used 2) when self-tapping Torx® screws are used (Torx® 20, M4) Classifications eCl@ss eCl@ss 5.1 27143424 eCl@ss 6.0 27143423 08/10/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/1413364 Housing - HC-ADV-B06-HLWH-1TTM25-EMC-AL - 1413364 Classifications eCl@ss eCl@ss 8.0 27440202 eCl@ss 9.0 27440202 ETIM ETIM 5.0 EC000437 Approvals Approvals Approvals EAC / GL Ex Approvals Approvals submitted Approval details EAC  GL  Accessories Accessories Full screw connection Cable gland - HC-K-KV-M25(11-17) - 1690639 Plastic screw connection up to 5 bar, thread length: 8 mm, cable diameter: 11 - 17 mm, WAF 29, screw connection: M25     08/10/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/1413364 Housing - HC-ADV-B06-HLWH-1TTM25-EMC-AL - 1413364 Accessories Cable gland - HC-M-KV-M25(14-21) - 1646007 Metal screw connection up to 5 bar, thread length: 7 mm, cable diameter: 14 - 21 mm, WAF 34, screw connection: M25     Cable gland - HC-EMV-KV-M25(9-16,5) - 1690516 EMC screw connection up to 5 bar, thread length: 7.5 mm, cable diameter: 9.0 - 16.5 mm, WAF 29, screw connection: M25     Cable gland - HC-M-KV-M25(1ASI) - 1584020 Metal screw connection for an AS-Interface flat-ribbon conductor, thread type M25     Labeled device marker Plastic label - US-EMLP (20X9) CUS - 0830085 Plastic label, can be ordered: By card, white, labeled according to customer specifications, Mounting type: Adhesive, Lettering field: 20 x 9 mm     Mounting material Screw - HC-B-TMS-ERSSCHR-IMB - 1409244 Replacement locking screw, M6, stainless steel, for HEAVYCON-ADVANCE housing, HC-B...TMS...EEE design, 5 mm Allen screw     08/10/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/1413364 Housing - HC-ADV-B06-HLWH-1TTM25-EMC-AL - 1413364 Accessories Multiple screw connection Cable gland - HC-M-KV-M25(1X10/1X11) - 1580228 Special cable screw connection M25, brass nickel-plated, grommet with 10 mm and 11 mm holes     Panel mounting flange Mounting flange - HC-B-AF - 1686533 Panel mounting flange for HEAVYCON-ADVANCE TMS housing with screw locking     Mounting flange - HC-B-AF-SET - 1604638 ® Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping screws (M4, Torx ) and 4 fan-type washers     Protective cover Protective covers - HC-B 6-TMS-SD-IP50 - 1690736 Protective cover B6, Clip locking, Protective cover material: PA, Seal: no, With lanyard, Diameter of retaining cord eyelet: 4 mm     08/10/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/1413364 Housing - HC-ADV-B06-HLWH-1TTM25-EMC-AL - 1413364 Accessories Protective covers - HC-B 6-TMS-SD-IP65 - 1690778 HEAVYCON ADVANCE IP65 protective cover B6, for panel mounting side, with screw locking, with retaining cord, diameter of retaining cord eyelet 3 mm     Screwdriver tools Screwdriver - SF-BIT-HEXB 5-89 - 1208911 Screw bit, hexagonal with ball head, E6.3-1/4" drive, size: Hex 5 x 89 mm, hardened, suitable for holder according to DIN 3126-F 6.3/ISO 1173     Screwdriver - SF-M BH - 1212070 Bit screwdriver, with 1/4" quick-action chuck, handle length 119 mm, 2-component handle, with non-slip grip, suitable for bits according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/10/2016   Page 6 / 6