1413400

https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON ADVANCE sleeve housing, B10, with stainless steel screw locking (Allen screw), salt-water-resistant aluminum, height 93.7 mm, with 1x M25 thread, straight cable outlet, without surface; conductive seal (EMC properties) Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626030340 Weight per Piece (excluding packing) 260.000 g Custom tariff number 85389099 Country of origin China Technical data Dimensions Height 93.7 mm Width 57 mm Length 105 mm Length of the assembly cutout 65 mm Width of the assembly cutout 35 mm Ambient conditions Degree of protection of housing (IP) IP66 IP68 (0.2 bar/24 h) IP69K (ISO 20653:2013-02) 03/05/2018   Page 1 / 7 https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 Technical data Ambient conditions Degree of protection of housing (NEMA) 4 (UL 50e) 4X (UL 50e) 12 (UL 50e) Ambient temperature (operation) -40 °C ... 125 °C General Note For contact inserts HC-B10, BB18, DD42, M, K8/24 Size B10 Housing type Sleeve housing Color gray aluminum Locking type Screw locking Torque 3 Nm (Locking screw) Fixing screws M6 (screw head: 5 mm Allen screw) No. of cable outlets 1 Cable outlet straight Screw connection none Type of the screw connection 1x M25 Housing material Die-cast aluminum, salt water resistant Housing surface material Uncoated Seal material NBR, conductive Material lock Stainless steel Assembly instructions In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. Connection To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. Drawings Dimensional drawing Dimensional drawing 83 35 32 93,7 65 Ø4,51) Ø3,62) 105 Panel cutout 57 Dimensional drawing 03/05/2018   Page 2 / 7 https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 2) When self-tapping screws are used (Torx® 20, M4) Classifications eCl@ss eCl@ss 5.1 27143424 eCl@ss 6.0 27143423 eCl@ss 8.0 27440202 eCl@ss 9.0 27440202 ETIM ETIM 5.0 EC000437 ETIM 6.0 EC000437 UNSPSC UNSPSC 13.2 31261501 Approvals Approvals Approvals GL / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details GL    http://exchange.dnv.com/tari/  6196614 HH UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E255026 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E255026 03/05/2018   Page 3 / 7 https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 Approvals EAC  cULus Recognized      RU CDE.AI30.B.01102   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Full screw connection Cable gland - HC-K-KV-M25(11-17) - 1690639 Plastic screw connection up to 5 bar, thread length: 8 mm, cable diameter: 11 - 17 mm, WAF 29, screw connection: M25     Cable gland - HC-M-KV-M25(14-21) - 1646007 Metal screw connection up to 5 bar, thread length: 7 mm, cable diameter: 14 - 21 mm, WAF 34, screw connection: M25     Cable gland - HC-EMV-KV-M25(9-16,5) - 1690516 EMC screw connection up to 5 bar, thread length: 7.5 mm, cable diameter: 9.0 - 16.5 mm, WAF 29, screw connection: M25     03/05/2018   Page 4 / 7 https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 Accessories Cable gland - HC-M-KV-M25(1ASI) - 1584020 Metal screw connection for an AS-Interface flat-ribbon conductor, thread type M25     Labeled device marker Plastic label - US-EMLP (20X9) CUS - 0830085 Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 20 x 9 mm     Multiple screw connection Cable gland - HC-M-KV-M25(1X10/1X11) - 1580228 Special cable screw connection M25, brass nickel-plated, grommet with 10 mm and 11 mm holes     Panel mounting flange Mounting flange - HC-B-AF - 1686533 Panel mounting flange for HEAVYCON-ADVANCE TMS housing with screw locking     03/05/2018   Page 5 / 7 https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 Accessories Mounting flange - HC-B-AF-SET - 1604638 ® Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping screws (M4, Torx ) and 4 fan-type washers     Protective cover Protective covers - HC-B 10-TMS-SD-IP50 - 1690749 Protective cover B10, Clip locking, protective cover material: PA, height: 31.2 mm, seal: no, With lanyard, Diameter of retaining cord eyelet: 4 mm     Protective covers - HC-B 10-TMS-SD-IP65 - 1690781 HEAVYCON ADVANCE IP65 protective cover B10, for panel mounting side, with screw locking, with retaining cord, diameter of retaining cord eyelet 3 mm     Screwdriver tools Screwdriver - SF-BIT-HEXB 5-89 - 1208911 Screw bit, hexagonal with ball head, E6.3-1/4" drive, size: Hex 5 x 89 mm, hardened, suitable for holder according to DIN 3126-F 6.3/ISO 1173     Screwdriver - SF-M BH - 1212070 Bit screwdriver, with 1/4" quick-action chuck, handle length 119 mm, 2-component handle, with non-slip grip, suitable for bits according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic     03/05/2018   Page 6 / 7 https://www.phoenixcontact.com/us/products/1413400 Housing - HC-ADV-B10-HHWH-1TTM25-EMC-AL - 1413400 Accessories Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 03/05/2018   Page 7 / 7