1414023

https://www.phoenixcontact.com/us/products/1414023 Housing screw connection - SACC-BP-F-M12/M15-6-SMD SCO - 1414023 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1 Why buy this product ■ ■ ■ ■ Reduced mounting costs thanks to two-piece device connector Easy device integration, thanks to mechanical port screw connections with threaded fastening Efficient PCB assembly: two-piece connectors for SMT soldering SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 STK Minimum order quantity 20 STK Weight per Piece (excluding packing) 9.0 g Custom tariff number 79070000 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 (when plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 08/11/2016   Page 1 / 3 https://www.phoenixcontact.com/us/products/1414023 Housing screw connection - SACC-BP-F-M12/M15-6-SMD SCO - 1414023 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Standards/regulations M12 connector IEC 61076-2-101 In line with Insertion/withdrawal cycles > 100 Torque 1.5 Nm ... 2 Nm (Installation-side) Mounting type Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 6 mm Material Material, knurls Zinc die-cast, nickel-plated Material Zinc die-cast (nickel-plated) Sealing material FKM (O-ring on housing) FKM (O-ring (pin connector pattern)) Additional material specifications Brass, nickel-plated (Locking nut) Cable Standards/specifications M12 connector IEC 61076-2-101 In line with Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Drawings Dimensional drawing 0,75 11 18 Ø13,8 M15x1 M12x1 Speedcon 19 1,25 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 8.0 23100602 08/11/2016   Page 2 / 3 https://www.phoenixcontact.com/us/products/1414023 Housing screw connection - SACC-BP-F-M12/M15-6-SMD SCO - 1414023 Classifications ETIM ETIM 4.0 EC001855 ETIM 5.0 EC002350 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/11/2016   Page 3 / 3