1414233

https://www.phoenixcontact.com/gb/products/1414233 Housing screw connection - SACC-BP-F-M12/ VAR-2,4/3,2-9TIP - 1414233 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) M12 housing screw connection with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts. Suitable for 2.4 mm ... 3.2 mm thick front plates. Key Commercial Data Packing unit 10 STK Minimum order quantity 10 STK GTIN GTIN 4055626022741 Weight per Piece (excluding packing) 10.480 g Custom tariff number 79070000 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of pollution, the connector must be sealed using a protective cap > IP54. The M12 housing screw connection can only be used in conjunction with mating connectors and protective caps with M12 standard thread. Mating connectors with SPEEDCON thread cannot be used. Standards/regulations M12 connector IEC 61076-2-101 Insertion/withdrawal cycles > 100 Torque 0.6 Nm (Tightening torque of mating connector) 12/22/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1414233 Housing screw connection - SACC-BP-F-M12/ VAR-2,4/3,2-9TIP - 1414233 Technical data General Mounting type Rear mounting 2-section, lockable Material Flammability rating according to UL 94 V0 Sealing material FKM (Form seal) FKM (O-ring (pin connector pattern)) Additional material specifications PA 66 (Fixing sleeve) Zinc die-cast, nickel-plated (Threaded sleeve) Color black (Fixing sleeve) Cable Standards/specifications M12 connector IEC 61076-2-101 Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing 12,8 !2,4 "3,2 Ø16,5⁰¹ Ø21,5 Ø17,5 15⁰¹ M12x1 Ø23 3,2 Dimensional drawing Panel cutout Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 8.0 23100602 12/22/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1414233 Housing screw connection - SACC-BP-F-M12/ VAR-2,4/3,2-9TIP - 1414233 Classifications eCl@ss eCl@ss 9.0 23100602 ETIM ETIM 4.0 EC001855 ETIM 5.0 EC002350 UNSPSC UNSPSC 13.2 31171603 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      B.01742 Accessories Accessories Panel mounting base Housing screw connection - SACC-BP-F-FIX/NUT-BL-THR - 1417782 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     12/22/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1414233 Housing screw connection - SACC-BP-F-M12/ VAR-2,4/3,2-9TIP - 1414233 Accessories Housing screw connection - SACC-BP-F-FIX/NUT-CY-THR - 1417783 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     Housing screw connection - SACC-BP-F-FIX/NUT-RD-THR - 1417784 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     Housing screw connection - SACC-BP-F-FIX/NUT-YE-THR - 1417785 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     Housing screw connection - SACC-BP-F-FIX/NUT-GN-THR - 1417787 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     Housing screw connection - SACC-BP-F-FIX/NUT-VT-THR - 1417788 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     12/22/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1414233 Housing screw connection - SACC-BP-F-M12/ VAR-2,4/3,2-9TIP - 1414233 Accessories Housing screw connection - SACC-BP-F-FIX/NUT-OR-THR - 1417789 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     Housing screw connection - SACC-BP-F-FIX/NUT-BK-THR - 1419697 Fixing sleeve for M12 housing screw connection with tolerance-compensating function, for THR solderable M12 socket contact inserts.     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 5 / 5