1414359

https://www.phoenixcontact.com/us/products/1414359 Contact insert module - HC-M-03-CT-F - 1414359 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Contact insert module, Number of positions: 3, Socket, Crimp connection, 690 V, 40 A, 1.5 mm² ... 10 mm², Application: Power Key Commercial Data Packing unit 1 STK Minimum order quantity 5 STK GTIN GTIN 4055626025025 Weight per Piece (excluding packing) 12.000 g Custom tariff number 85389099 Country of origin Poland Technical data Dimensions Height 44.7 mm Width 34.2 mm Length 14.6 mm Electrical characteristics Note For HEAVYCON housing type B6 to B48, HC-M-B...MF-... hinged module carrier frame required, CK4,0...... crimp contacts, crimp contacts not supplied as standard. Rated voltage (III/3) 690 V Rated current 40 A Rated surge voltage 6 kV 04/11/2017   Page 1 / 4 https://www.phoenixcontact.com/us/products/1414359 Contact insert module - HC-M-03-CT-F - 1414359 Technical data Electrical characteristics Connection profile 3 Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Mechanical characteristics Conductor cross section 1.5 mm² ... 10 mm² Connection cross section AWG 16 ... 8 Stripping length of the individual wire 9 mm (for 1.5 - 2.5 mm²) 9.6 mm (for 4 mm² ... 6 mm²) 15 mm (for 10 mm²/conductor ≥ 5 mm diameter) 18 mm (for 10 mm²/conductor ≥ 6.4 mm diameter) Wire diameter including insulation 7.5 mm Insertion/withdrawal cycles ≥ 500 Minimum housing height 52 mm General Series HC-M-03 Color light gray Number of module slots 1 Connection method Crimp connection Connection in acc. with standard IEC / EN Flammability rating according to UL 94 V0 Degree of pollution 3 Overvoltage category III Assembly instructions Housing height ≥ 52 mm. Plug-in connections may only be operated only when there is no load/ voltage. Connection The CK4,0-EWZ tool (order no. 1662735) is required for removing the crimp contacts. At every "C" contact chamber, the position of the contact retaining springs is marked with two black markings on the connection side. From the connection side, the tool is pushed over the contact in a position-oriented manner, so that it touches both the retaining springs. Then insert it up to the limit stop. Do not turn the inserted tool. Push the conductor out of the insulating body along with the tool from the connection side. Material data Contact material Copper alloy Contact surface material Ag Contact carrier material PC Standards and Regulations 04/11/2017   Page 2 / 4 https://www.phoenixcontact.com/us/products/1414359 Contact insert module - HC-M-03-CT-F - 1414359 Technical data Standards and Regulations Connection in acc. with standard IEC / EN Flammability rating according to UL 94 V0 Drawings Diagram I [A] Schematic diagram 60 50 1 ! 40 30 2 20 10 0 20 3 = 10 mm 2 ! = 6 mm 2 " = 4 mm 30 40 2 " 50 60 70 80 90 100 110 120 130 T [°C] Connector pin assignment Derating diagram (6 modules in HC-B 24 housing) Dimensional drawing 37,5 34,1 14,6 Approvals Approvals Approvals EAC / UL Recognized / CSA Ex Approvals Approval details 04/11/2017   Page 3 / 4 https://www.phoenixcontact.com/us/products/1414359 Contact insert module - HC-M-03-CT-F - 1414359 Approvals EAC      7500651.22.01.00246 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E118976     mm²/AWG/kcmil 10 Nominal current IN 42 A Nominal voltage UN 600 V CSA    http://www.csagroup.org/services/testingand-certification/certified-product-listing/     mm²/AWG/kcmil 10 Nominal current IN 33 A Nominal voltage UN 600 V  13631 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/11/2017   Page 4 / 4