SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Cable connector, Ethernet CAT6 A (10 Gbps), 8-pos., halogen-free, shielded, insulation
displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5
mm ... 9.7 mm
Your advantages
• Innovative and time saving - QUICKON fast connection for time saving of up to 80 % for on-site connection
• Safe use in the field, thanks to a high degree of protection
• Reliable signal transmission – 360° shielding in environments with electromagnetic interference
• Insulation displacement connection: innovative and time-saving assembly without stripping the single wire
Commercial data
Item number
1414412
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
BF31
Product key
BF6EFI
Catalog page
Page 342 (C-2-2019)
GTIN
4055626025490
Weight per piece (including packing)
62.8 g
Weight per piece (excluding packing)
62 g
Customs tariff number
85366990
Country of origin
DE
Oct 15, 2024, 12:39 AM
Page 1 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Technical data
Notes
Assembly note
NOTE: Observe the permissible bending radii when routing
cables, since the degree of protection may be at risk if the
bending forces are too high. Reduce mechanical loads upstream
of the connector, e.g., by using cable ties.
Mounting
Assembly note
If the conductor is to be reconnected, it must be cut off above the
last contact point.
Product properties
Product type
Cable connector
Sensor type
Ethernet
Number of positions
8
No. of cable outlets
2
Shielded
yes
Data management status
Article revision
04
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Dimensions
Dimensional drawing
Length
83 mm
Wrench size, union nut
15 mm
Wrench size, counter nut
17 mm
External dimensions
Outside diameter
5 mm ... 9.7 mm
Connection data
Connection technology
Connection method
Insulation displacement connection
Frequency of connections between conductors of the same cross
section
10
Conductor connection
Oct 15, 2024, 12:39 AM
Page 2 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Structure of individual litz in acc. with VDE 0295 / smallest wire
diameter
Class 2-6
Tightening torque
5 Nm (Pressure nut)
Wrench size, union nut
15 mm
Wrench size, contact carrier
17 mm
Wire diameter including insulation
0.75 mm ... 2 mm
Tightening torque
5 Nm (Pressure nut)
Pin assignment
Contact | Color (signal designation) | Contact (optional)
1 = WHOG (D1+)
2 = OG (D1-)
3 = WHGN (D2+)
4 = GN (D2-)
5 = WHBN (D4+)
6 = BN (D4-)
7 = WHBU (D3-)
8 = BU (D3+)
Electrical properties
Rated surge voltage
0.8 kV
Insulation resistance
≥ 100 MΩ
Nominal voltage UN
48 V AC
60 V DC
Nominal current IN
0.5 A (30 W)
Transmission characteristics (category)
CAT6A
Material specifications
Flammability rating according to UL 94
V0
Seal material
NBR
Material of grip body
Zinc die-cast, nickel-plated
Contact material
CuSn
Contact surface material
Ni/Au
Contact carrier material
PA 6.6
Material for screw connection
Zinc die-cast, nickel-plated
Standards/regulations
PA 6.6: Fire protection in rail vehicles - requirement sets R22,
R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Wire insulation material
PVC / PE / PP / rubber
Connector
Connection 1
Head design
Cable connectors
Cable/line
Signal type/category
Ethernet CAT6A (IEC 11801), 10 Gbps
Oct 15, 2024, 12:39 AM
Page 3 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP65
IP67
Ambient temperature (operation)
-40 °C ... 85 °C
Ambient temperature (assembly)
-5 °C ... 50 °C
Standards and regulations
Testing
Standards/regulations
PA 6.6: Fire protection in rail vehicles - requirement sets R22,
R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/specifications
based on IEC 61076-2-109
Standard designation
Shock, vibration
Standards/specifications
EN 50155:2001
Oct 15, 2024, 12:39 AM
Page 4 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Drawings
Dimensional drawing
19
≈ 83
15
Ø 5 - 6 mm
17
6
80
Functional drawing
Ø 6 - 9,7 mm
6
15
80
0,14 - 0,34 mm²
5 Nm
15
17
5 Nm
15
PVC/PE/
PP/rubber
Oct 15, 2024, 12:39 AM
Page 5 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1414412
EAC
EAC-RoHS
Approval ID: RU C-DE.BL08.B.00511
Approval ID: RU D-DE.HB35.B.00387
Oct 15, 2024, 12:39 AM
Page 6 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Classifications
ECLASS
ECLASS-11.0
27440102
ECLASS-12.0
27440116
ECLASS-13.0
27440116
ETIM
ETIM 9.0
EC002635
UNSPSC
UNSPSC 21.0
39121400
Oct 15, 2024, 12:39 AM
Page 7 (8)
SACC-CC-8QO SH ETH - Conductor connector
1414412
https://www.phoenixcontact.com/us/products/1414412
Environmental product compliance
EU RoHS
Fulfills EU RoHS substance requirements
Yes, No exemptions
China RoHS
Environment friendly use period (EFUP)
EFUP-E
No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)
No substance above 0.1 wt%
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 15, 2024, 12:39 AM
Page 8 (8)
