1415296

https://www.phoenixcontact.com/za/products/1415296 Flush-type connector - SACC-E-M12FSL-4FE-M16XL/0,2 - 1415296 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, Power, 5-position, Socket, M12, L - Power, Front mounting, M16 x 1.5, Individual wires, cable length: 0.2 m, 2.50 mm², PEX litz wire Your advantages  For compact devices: transmit high power in a confined space  Easy-to-install, optimized XL housing contour with wrench size 19  Mechanical tightening limitation for long-term-stable gasket  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626056258 Weight per Piece (excluding packing) 47.900 g Custom tariff number 85444290 Country of origin Germany Note Made to Order (non-returnable) Technical data Dimensions Length of cable 0.2 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 12/03/2020   Page 1 / 5 https://www.phoenixcontact.com/za/products/1415296 Flush-type connector - SACC-E-M12FSL-4FE-M16XL/0,2 - 1415296 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. FE not connected to metal parts that can be touched, no protective function Rated current at 40°C 16 A Rated voltage 63 V Rated surge voltage 1.5 kV Number of positions 5 Coding L - Power Standards/regulations M12 connector IEC 61076-2-111 In line with Signal type/category Power Status display No Overvoltage category III Degree of pollution 3 Test voltage 1.5 kV Connection method Individual wires Insertion/withdrawal cycles > 100 Mounting type Front mounting M16 x 1.5 Assembly instructions Tightening limitation Thread type M16 x 1.5 Halogen-free according to IEC 60754-1 Flame resistance in acc. with UL FT-2 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Additional material specifications PU 2K (Grout material) Cable Cable type PEX litz wire Conductor cross section 2.5 mm² AWG signal line 14 Wire colors brown 1, white 2, blue 3, black 4, gray FE Material conductor insulation PE-X Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-111 In line with 12/03/2020   Page 2 / 5 https://www.phoenixcontact.com/za/products/1415296 Flush-type connector - SACC-E-M12FSL-4FE-M16XL/0,2 - 1415296 Technical data Cable Test voltage Core/Core 6 kV Other resistance Hydrolysis-resistant Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) -40 °C ... 105 °C (cable, fixed installation) -25 °C ... 105 °C (cable, flexible installation) Standards and Regulations Standards/specifications M12 connector IEC 61076-2-111 In line with Flame resistance in acc. with UL FT-2 Halogen-free according to IEC 60754-1 Other resistance Hydrolysis-resistant Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram Dimensional drawing 28,2 FE L 1 0,9 11,8 4 Pin assignment of M12 socket, 5-pos., L-coded, socket side view M12x1 M16x1,5 2 3 2,8 19 M12 flush-type socket Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 11.0 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 12/03/2020   Page 3 / 5 https://www.phoenixcontact.com/za/products/1415296 Flush-type connector - SACC-E-M12FSL-4FE-M16XL/0,2 - 1415296 Classifications eCl@ss eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details EAC   cULus Recognized      B.01687  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E468743-20180113     Nominal voltage UN 63 V Nominal current IN 16 A mm²/AWG/kcmil 14 Accessories Accessories Flat nut 12/03/2020   Page 4 / 5 https://www.phoenixcontact.com/za/products/1415296 Flush-type connector - SACC-E-M12FSL-4FE-M16XL/0,2 - 1415296 Accessories Flat nut - SACC-E-MU-M16 - 1504097 Flat nut with M16 thread     Screw plug - PROT M12 MS PWR - 1092802 An M12 screw plug for the unoccupied M12 females of the M12 POWER connectors, boxes, and flush-type connectors     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 12/03/2020   Page 5 / 5